SPINDLE AS 1284125 - Caterpillar

Left Turn - Move the thumb wheel to the left on the right joystick in order to steer the machine to the left. The turning angle increases as the result of a greater amount of force applied to the left side of the thumb wheel.
Right Turn - Move the thumb wheel to the right on the right joystick in order to steer the machine to the right. The turning angle increases as the result of a greater amount of force applied to the right side of the thumb wheel. Note: If the second gear is active, the system will not allow the operator to activate the Joystick Steering. The monitor will display a warning that the joystick steering is not active. If the joystick steering is active, the system will not allow the operator to engage into second gear. Offset Boom (If Equipped)
( M316D, M318D and M322D)Note: Disable the Joystick Steering control before you enable the offset boom function.
Illustration 9 g02383402
Use the offset boom switch in order to activate the offset boom. For further information on activating the offset boom, refer to Operation and Maintenance Manual, "Operator Controls".
Right Offset - Move the thumb wheel on the right joystick to the right in order to swing the offset boom to the right.
Left Offset - Move the thumb wheel on the right joystick to the left in order to swing the offset boom to the left. Hydraulic Cab Riser
( M318D MH and M322D MH)
Roading the machine with the cab in the elevated position can cause bodily injury.To prevent the possibility of injury, only road the machine with the cab in the lowered position.
Note: Disable the Joystick Steering control before you enable the hydraulic cab riser function.Note: Stop the machine before the cab riser is raised or lowered.
Illustration 10 g02383402
Use the cab riser switch in order to enable the cab riser function. For further information on enabling the cab riser function, refer to Operation and Maintenance Manual, "Operator Controls".
Lower Cab - Move the thumb wheel on the right joystick in order to lower the cab. Note: To lower the cab, the left console must be lowered and the left side access door must be closed.Note: When the cab is being lowered, a buzzer will sound.
Raise Cab - Move the thumb wheel on the right joystick to the left in order to raise the cab. Heavy Lift Mode (17)
Heavy Lift Mode (17) - Press the lower right switch on the back of the right joystick in order to activate heavy lift function. Note: Once the heavy lift function is activated, the heavy lift function will only be available for 60 seconds. After 60 seconds, the lifting capabilities will return to normal working conditions.This work mode increases the relief pressure in the hydraulic circuit, which increases the hydraulic force that is available for lifting operations. The cylinder speed is slower when this mode is selected.Note: During normal excavation work, the heavy lift control must be in the OFF position.Magnet Control