SPINDLE AS-RH 1323541 - Caterpillar

Installation Procedure
Locate a hoist that can lift the following components:
The 171-5564 Bracket weighs 126 kg (278 lb).
The Shear weighs 580 kg (1279 lb).
Illustration 1 g03137496
Attach the Shear to 171-5564 Bracket (X). Use six 7X-2562 Bolts (Z) and 8T-4123 Plated Washers (Y). Tighten the bolts to a torque of 460 60 N m (339 44 lb ft). Refer to illustration 1.Note: The bracket, bolts, and washers are not included in the 171-5565 Connecting Lines Group .
Install the mounting bracket to the machine. Refer to Operation and Maintenance Manual, SEBU7468, "Work Tool Coupler Operation - Attaching the Work Tool".
Illustration 2 g03571180
(14) 280-9186 Diverter Valve and Mounting (21) 3E-8025 Bolt
Install the valve group (14) to the bracket assembly. Use four bolts (21). Tighten the bolts to a torque of 12 3 N m (9 2 lb ft).
Illustration 3 g03571197
Expanded view of the connecting lines group. Refer to Table 1 for a full parts list.
Illustration 4 g03137245
Illustration 5 g03137246
Assemble the hydraulic components to the valve group (14) and the shears rotator.
Table 2
Ports for Valve Group (13)         Ports for Rotator    
"A"     "Connects to"     "R2"    
"B"     "Connects to"     "R1"    
"C"     "Connects to"     "Go"    
"D"     "Connects to"     "Gs"    
Install wire harness (15) to the valve group (14) .