SPINDLE 2G7682 - Caterpillar

2G7682 SPINDLE Caterpillar parts 120G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2G7682
2G-7682
2G7682

Weight: 848 pounds 384 kg.

Buy SPINDLE 2G7682 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 2G7682:

MOTOR GRADER 120G Caterpillar

Number on catalog scheme: 10

For full view, you need register

Information:

Required Parts
Table 1
Qty Part Number Description
1 - 3/4 NPT plug
2 - Loctite 536 Installation Procedure
Illustration 1 g06079854
(A) Drill
(B) Rim base
(C) 23.0 mm (0.91 inch)
Drill a pilot hole of 23.0 mm (0.91 inch) (C) using drill (A) on the rim base (B).
Illustration 2 g06107078
(D) 3/4 NPTF tap
Thread the pilot hole using 3/4 NPTF tap (D) and tapping grease
Clean the thread, remove grease and burr.
Illustration 3 g06079863
3/4 NPTF thread gauge
Visually inspect the thread and inspect the thread depth using 3/4 NPTF thread gauge.
Illustration 4 g06079866
(1) 3/4 NPT plug
(2) Loctite 536
Apply Loctite 536 (2) to the plug (1)Note: Make sure that the tip of plug is not covered with sealant.
Illustration 5 g06079869
Insert plug (1) to the rim base (B). Tighten plug to 100 to 115 N m (74 to 85 lb ft).Note: Process it according to tap manufacturing procedure
Illustration 6 g06079871
(E) Location from the gutter edge
Illustration 7 g06079874
(F) Angle from valve hole
Location of the NPT hole from gutter edge (E) and angle from the valve hole (F) is given in Table 2.
Table 2
Vehicle Rim Size/Description Rim Fitment Location Location from Gutter Edge (E) Angle from valve hole (F)
CAT 785 24.00 x 51/ Standard rims Fits at all six wheel positions 200.0 mm (7.87 inch) 160 degrees
24.00 x 51/ Double Gutter Quick change rims Fits only the rear outer locations 304.0 mm (11.97 inch) 180 degrees
26.00 x 51/ Standard rims Fits at all six wheel positions 200.0 mm (7.87 inch) 160 degrees
26.00 x 51/ Double Gutter Quick change rims Fits only the rear outer locations 304.0 mm (11.97 inch) 180 degrees
CAT 789 29.00 x 57/ Standard rims Fits at all six wheel positions 320 mm (12.6 inch) 180 degrees
29.00 x 57/ Double Gutter Quick change rims Fits only the rear outer locations 315.4 mm (12.41 inch) 180 degrees
CAT 793 29.00 x 57/ All Rim types All wheel position fitment Locations 315.4 mm (12.41 inch) 180 degrees
32.00 x 57/ All Rim types
CAT 795 41.00 x 63/ All Rim types All wheel position fitment Locations 400.0 mm (15.74 inch) 90 degrees
CAT 797 44.00 x 63/ All Rim types All wheel position fitment Locations 400.0 mm (15.74 inch) 90 degrees