SPINDLE AS 3847881 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     9S-3263     Thread Lock Compound     -    Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
Illustration 1 g01121420
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install stem (20), retainer (21), and spring (22). Install O-ring seal (23) on cover (24). Position cover (24). Install bolts (25) .
Illustration 2 g01121408
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retainer (15) and spring (16). Install O-ring seal (17) on cover (18). Position cover (18). Install bolts (19) .
Illustration 3 g01121387
Install seal rings (13) and O-ring seals (12) onto cartridge assembly (14). Install O-ring seal (11). Install cartridge assembly (14). Tighten cartridge assembly (14) to a torque of 30 4 N m (22 3 lb ft).
Illustration 4 g01118958
Install O-ring seal (7). Position elbow (8). Install washers (9) and bolts (10). Install coil assembly (4). Install washer (5). Apply Tooling (A) to the threads of nut (6). Install nut (6). Tighten nut (6) to a torque of 14 3 N m (10 2 lb ft). Install O-ring seals (2) and (3) onto fittings (1). Install fittings (1) .End By: Install the dual tilt control valve. Refer to Disassembly and Assembly, "Control Valve (Dual Tilt) - Install".