SPINDLE GP 4156340 - Caterpillar

Illustration 9 g00700653
Connect twelve hydraulic hoses (43), (42), (41), (40), (39), (38), (37), (36), (35), (34), (33) and (32) to the bank valve.Note: Replace any O-rings on the hydraulic hoses that are not in serviceable condition.
Illustration 10 g00700093
Connect ten hydraulic hoses (31), (30), (29), (28), (27), (26), (25), (24), (23) and (22) to the bank valve.Note: Replace any O-rings on the hydraulic hoses that are not in serviceable condition.
Illustration 11 g00710774
Place seat support (21) in position.
Secure seat support (21) with seven bolts (20) .
Connect all wiring that was disconnected. Secure wiring with wire tie-wraps to seat support (21) .
Illustration 12 g00710828
Illustration 13 g00710751
Place two consoles (19) into position.
Install two shafts (18). Shafts (18) will secure consoles (19) to seat support (21). Install two bolts (17) .
Install two bolts (16). Bolts (16) secure the front portion of the right console (18) to seat support (21) .
Illustration 14 g00700084
Install two handles (15) of the speed and direction control.
Install the washer and retaining ring (12). Retaining ring (12) will secure two handles (15) .
Illustration 15 g00701867
Install two linkage rods (14). Install the two washers and two nuts (13). Tighten two nuts (13) to a torque of 15 3 N m (11 2 lb ft).
Illustration 16 g00710889
Install plate assembly (10) onto handles (15). Place plate assembly (10) into position.
Illustration 17 g00700053
Install two foot pedals (8) on the handles of the speed and direction control.
Illustration 18 g00700008
Install linkage (6) on the pedal. Secure linkage (6) with the washer and nut (5) .
Illustration 19 g00700004
Install linkage (4) on the pedal. Secure linkage (4) with the washer and nut (3) .
Illustration 20 g00700069
Install plate (10) in position.
Secure a portion of plate (10) with two bolts (11) .
Illustration 21 g00700066
Secure a portion of plate (10) with two bolts (9) .
Illustration 22 g00552009
Install plate assembly (2) in position. Install eight bolts (1) and washers. Bolts (1) secure plate assembly (2) to the body of the machine.