SPINDLE 5470738 - Caterpillar

Enclosure Filter Replacement Procedure
Ensure that all safety procedures are followed before accessing the filters.
Open the door that houses the filter that needs replacement. Filters should generally be replaced at the same time.
Illustration 1 g03883759
(1) Housing screws
Remove the two housing screws (1) that are located on the vertical side of the enclosure filter housing. Slide the housing open. Be careful not to bend the metal tabs too much. Remove the housing.
Illustration 2 g03883760
Remove the filter material (3).
Install the replacement filter material.
Install the filter material in the filter housing.
Ensure that the metal tabs are in place. Install the housing.
Line up mounting holes for the housing screws (1) and install all four mounting screws.