SPINDLE 5S6351 - Caterpillar

Illustration 1 g01055569
(1) Window wiper and washer groupNote: In the parked position, the wiper blade should be between 60 mm and 150 mm from the edge of the window.The tension of the wiper arm in the loaded position ... 7.5 .5 N (1.7 0.1 lb)
Illustration 2 g01055524
Window Wiper and Washer Group (2) Torque for the 4 bolts at the base of the wiper arms ... 14 2 N m (125 18 lb in)Note: By using a wire with the diameter of 0.5 mm, adjust the jets of the nozzle assembly to direct spray onto the glass directly in front of the wiper blade. 185-2154 Window Wiper Motor and 155-5784 Window Wiper Motor
Illustration 3 g01055869
Note: 185-2154 Window wiper motor is installed on the inside, front of the cab. 155-5784 Window wiper motor is installed on the inside, back of the cab. (3) Tighten the 5 mounting screws to the following torque. ... 6 1 N m (55 9 lb in) (4) Tighten the nut to the following torque. ... 19 3 N m (170 27 lb in)
Illustration 4 g01055607
(5) Installation torque for the nuts on the 5 hose connectors ... 5 N m (45 lb in) (6) Wiper blade should be positioned vertical in the park position. ... 90 5° (7) Torque for the 2 nuts that secure the windshield washing fluid containerin place ... 60 12 N m (44 9 lb ft)The tension of the wiper arm in the loaded position ... 7.5 .5 N (1.7 0.1 lb)
Illustration 5 g01055600
Window Wiper and Washer Group (8) Torque for the 2 bolts at the base of the wiper arms ... 20 3 N m (180 27 lb in)Note: By using a wire with the diameter of 0.5 mm, adjust the jets of the nozzle assembly to direct spray onto the glass directly in front of the wiper blade.