SPINDLE 5V4062 - Caterpillar

Illustration 1 g02630820
Center of Machine (1) Oil cooler bypass manifold (2) Port "FC" (3) Port "TC" (4) Port "C" (5) Port "D" (6) Port "E" (7) Port "F" (8) Port "T"Oil cooler bypass manifold (1) is located in the center of the machine at the rear of the engine. The ports of the manifold are marked for identification.The combined return oil from the connected hydraulic systems is sent out port "TC" (3) of oil cooler bypass manifold (1), to the oil cooler. In this case, the oil is cooled and returned to the manifold at port "FC" (2). Cooled oil is directed out port "T" (8) of the manifold to the combined suction and return filter.Oil cooler bypass manifold (1) receives return oil from the following propel system hydraulic components:
Right propel motor case drain port "C" (4)
Left propel motor case drain port "D" (5)
Right propel pump case drain port "E" (6)
Left propel pump case drain port "F" (7)
Illustration 2 g02630821
Right Side of Machine (9) Hydraulic oil filterHydraulic oil filter (9) is installed in the top of the hydraulic oil tank. The right top deck cover provides access to this component.Hydraulic oil filter (9) is a combined suction and return filter. Oil from oil cooler bypass manifold (1) is directed to this filter. The propel charge pumps draw oil from the outlet side of the filter.
Illustration 3 g02630826
Left Side of Machine (10) Track tension manifold (11) Track tension pressure switch (12) Tap (13) Needle valve (14) Quick couplerLeft track tension manifold (10) is located on the left side of the machine. The door on the left side of the machine provides access to