AVSPARE.COM
parts catalog

SPOOL 0876535 - Caterpillar



0876535 SPOOL Caterpillar parts SPOOL
Rating:
46
Alternative (cross code) number:
CA0876535
087-6535
0876535
Caterpillar 0876535 SPOOL

Buy SPOOL 0876535 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g03692650
Table 1
Specification for 393-2760 Auger Conveyor and Mounting Gp and 446-1209 Auger Conveyor and Mounting Gp    
Item     Qty     Part     Specification Description    
1     8     8T-4193 Bolt     Tighten the bolts enough so that free play has been removed in the auger frame and secure with jam nuts.    
2     -     -     Apply Loctite C5A Copper Anti-Seize to all contact surfaces on tensioner plates, auger frame plate slots, washer contact areas, and tractor main frame slots.    
3     1     421-3386 Plate As     Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces.    
4     1     393-2293 Cover     Before assembly, apply Permetex Form-A-Gasket number 2, to seal cover to auger support.    
Illustration 2 g03692651
Table 2
Item     Qty     Part     Specification Description    
5     1     430-5201 Plate     Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces.    
6     1     393-2754 Plate As     Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces.    
7     2     442-7825 Plate     Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces.    
8     12     7X-2475 Bolt     Torque to
200 10 N m (148 7 lb ft).    
Illustration 3 g03692652
Right side view
Table 3
Item     Qty     Part     Specification Description    
B     -     -     Sprockets to be aligned within
60 2 mm (2.4 0.1 inch) on both sides to the plates.    
9     4     4B-1771 Setscrew     Before assembly, apply blue Loctite 242 to the threads.    
10     4     2H-3906 Socket Setscrew     Before assembly, apply blue Loctite 242 to the threads.    
11     2     382-5519 Auger Bearing     Use the following procedure to assemble the auger bearings:
1. Tighten the split cap close to the shaft.
2. Fully push the split cap on the housing of the auger bearing.
3. Tighten the bolts of the split cap.    


Parts spool Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.