SPOOL AS 1687807 - Caterpillar

Accumulated grease and oil on a machine is a fire hazard. Remove this debris with steam cleaning or high pressure water, at least every 1000 hours or each time any significant quantity of oil is spilled on a machine.
Make sure that all covers and guards are securely attached. Inspect the covers and guards for damage. Repair any damaged components.Wipe all fittings, all caps, and all plugs before you service the screed.Grease all of the fittings that must be serviced on a daily basis. Grease the fittings when the screed is at operating temperature, preferably at the end of the shift.Note: If any leaks are observed on the machine, repair the leak immediately. Check the fluid levels more frequently if there is a suspected leak.Before you start the machine, inspect the wiring for the electric heating system. Crushed wires and damaged cables can cause short circuits. Repair any damaged components before you operate the machine.Check the walkway isolation mounts for any deterioration. Replace any isolation mounts that are damaged.Inspect the hydraulic system for your machine. Look for leaks on the hose fittings and on the vibratory housing. Repair any leaks before you operate the machine.