SPOOL 5S6992 - Caterpillar

Illustration 1 g00906743
Front View (1) Torque for the locknuts ... 25 5 N m (18 4 lb ft)
Illustration 2 g00906746
Section A-A (2) 9P-7766 Shim Pack Total thickness of the shim pack ... 2.4 mm (.094 inch) Thickness of two shims ... 0.8 mm (.03 inch) Thickness of four shims ... 0.13 mm (.005 inch) Thickness of six shims ... 0.05 mm (.002 inch)Use shims in order to provide 0.10 0.05 mm (.004 .002 inch) end play on the input gear, as required. (3) Lubricate the bore with a minimal amount of the lubricant that is being sealed. (4) Lubricate the bore with a minimal amount of the lubricant that is being sealed. (5) Install the drain assembly to the depth of the dimension. Dimension (X) ... 20.3 0.5 mm (.80 .02 inch) Torque for the drain assembly ... 100 10 N m (75 7 lb ft) (6) Lubricate the bore with a minimal amount of the lubricant that is being sealed.
Illustration 3 g01193493
Detail B (7) Lubricate the seal lip with a minimal amount of the lubricant that is being sealed.
Illustration 4 g01193495
Detail C (8) Lubricate the seal lip with a minimal amount of the lubricant that is being sealed.