7I2769 SPOOL KIT-BOOM Caterpillar parts
Rating:
Alternative (cross code) number:
CA7I2769
7I-2769
7I2769
CA7I2769
7I-2769
7I2769
Weight: 2 pounds 1 kg.
Information:
Introduction
ReferenceReuse and Salvage Guidelines, SEBF8098, "Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material"The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The 391-4047 Plate-Clutch is currently in short supply.Solution
Table 1
Required Parts    
Item     Qty     Part Number     Description    
1     2     3T-3065     Plate-Clutch    
Illustration 1 g03692522
(A) 391-4047 Plate-Clutch (B) 5.12 0.08 mm (0.20157 0.00315 inch) (C) Surface finish between 1.4 and 0.63 muThe 391-4047 Plate-Clutch may be made from a new or used 3T-3065 Plate-Clutch by machining down the thickness of the plate.Refer to Illustration 1 for the thickness and surface requirements. Machine one or both sides of the plate to clean up any scratches or gouges ensuring that the thickness and surface finish requirements are maintained.Note: Before machining a used 3T-3065 Plate-Clutch , the plate-clutch must meet all of the reuse criteria in Reuse and Salvage Guidelines, SEBF8098, "Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material". Surface scratches or gouges are acceptable as long as the scratches and gouges can be removed by the machining process.
ReferenceReuse and Salvage Guidelines, SEBF8098, "Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material"The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The 391-4047 Plate-Clutch is currently in short supply.Solution
Table 1
Required Parts    
Item     Qty     Part Number     Description    
1     2     3T-3065     Plate-Clutch    
Illustration 1 g03692522
(A) 391-4047 Plate-Clutch (B) 5.12 0.08 mm (0.20157 0.00315 inch) (C) Surface finish between 1.4 and 0.63 muThe 391-4047 Plate-Clutch may be made from a new or used 3T-3065 Plate-Clutch by machining down the thickness of the plate.Refer to Illustration 1 for the thickness and surface requirements. Machine one or both sides of the plate to clean up any scratches or gouges ensuring that the thickness and surface finish requirements are maintained.Note: Before machining a used 3T-3065 Plate-Clutch , the plate-clutch must meet all of the reuse criteria in Reuse and Salvage Guidelines, SEBF8098, "Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material". Surface scratches or gouges are acceptable as long as the scratches and gouges can be removed by the machining process.
Parts spool Caterpillar catalog:
7I2768
SPOOL KIT-BOOM
Caterpillar
Caterpillar
7I2767
SPOOL KIT-SWIN
Caterpillar
Caterpillar
7I2766
SPOOL KIT-TRAV
Caterpillar
Caterpillar
7I2765
SPOOL KIT-STIC
Caterpillar
Caterpillar
7I2764
SPOOL KIT-ATT
Caterpillar
Caterpillar
7I2763
SPOOL KIT-BUCK
Caterpillar
Caterpillar
7I2770
SPOOL KIT-BUCK
Caterpillar
Caterpillar
7I2771
SPOOL KIT-STIC
Caterpillar
Caterpillar
7I2772
SPOOL KIT-SWIN
Caterpillar
Caterpillar
7I2773
SPOOL KIT-STIC
Caterpillar
Caterpillar
7I2774
SPOOL KIT-BOOM
Caterpillar
Caterpillar
7I2775
SPOOL KIT-STIC
Caterpillar
Caterpillar