1057962 SPRAY BAR AS Caterpillar parts
CB-214B
Rating:
Alternative (cross code) number:
CA1057962
105-7962
1057962
CA1057962
105-7962
1057962
Weight: 1 pounds 0 kg.
VIBRATORY COMPACTOR,
Compatible equipment models: 1057962:
Number on catalog scheme:
40
For full view, you need register
Information:
Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". Note: The hydraulic accumulator is installed under the main control valve.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the work tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Note: A hydraulic oil sample should be obtained before any maintenance is performed in order to establish the system contaminant level. Refer to Fluid Analysis Laboratory Guide, SEBF3116, "Obtaining an Oil Sample for S O S Analysis". Refer to Operation and Maintenance Manual, "Sampling Interval and Location of Sampling
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". Note: The hydraulic accumulator is installed under the main control valve.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the work tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Note: A hydraulic oil sample should be obtained before any maintenance is performed in order to establish the system contaminant level. Refer to Fluid Analysis Laboratory Guide, SEBF3116, "Obtaining an Oil Sample for S O S Analysis". Refer to Operation and Maintenance Manual, "Sampling Interval and Location of Sampling
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts spray Caterpillar catalog:
1G4033
SPRAY BAR AS
CB-214B
CB-214B
3929190
SPRAY GP-WATER
CB-14B
CB-14B
3944568
SPRAY AR-WATER
CB-14B
CB-14B
3676510
SPRAY AR-WATER
CB34B, CB34B XW
CB34B, CB34B XW
3602938
SPRAY GP-WATER
CW-34
CW-34
1G4791
SPRAY GP-WATER
PS-500
PS-500
5E7736
SPRAY GP-WATER
CB-521
CB-521
5E7733
SPRAY GP-WATER
CB-521
CB-521
5E7732
SPRAY GP-WATER
CB-521
CB-521
5E6962
SPRAY BAR AS
CB-521, CB-525B
CB-521, CB-525B
0832587
SPRAY BAR AS
CB-521, CB-525B
CB-521, CB-525B