AVSPARE.COM
parts catalog

SPRING-COIL 0000044 - Caterpillar



0000044 SPRING-COIL Caterpillar parts SPRING
Rating:
56
Alternative (cross code) number:
CA0000044
000-0044
0000044
Caterpillar 0000044 SPRING-COIL

Buy SPRING-COIL 0000044 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 2 g00622109
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (3).
Remove ring gear (4) from housing (5).
Illustration 3 g01234571
Remove friction discs (6) and the brake plates from housing (5).
Illustration 4 g00622111
Illustration 5 g00622113
Remove bolts (7) and plate (8). Note: Do not allow carrier (10) to fall when the carrier is pressed from housing (5).Note: If a shim pack is present between the plate (9) and planetary carrier (10). Reuse the same shim pack during assembly only if reusing the same planetary carrier (10). If a new planetary carrier (10) is being used the shim pack should be discarded.
Use a suitable press and Tooling (B) to remove carrier (10) from housing (5).
Remove bearing cone (9) from housing (5).
Illustration 6 g00622127
Remove ring (14) from planetary carrier (11).
Remove bolts (13).
Remove slinger (12) from planetary carrier (11).
The component is destroyed if the component is removed.
If necessary, remove bearing cone (15) from planetary carrier (11).
Illustration 7 g00996861
Use a hammer and a suitable punch to push pin (21) in shaft (20).
Illustration 8 g00996857
Remove shaft (20), planetary gear (19), discs (17), and bearings (18) from planetary carrier (11).
Remove pin (21) from shaft (20).
Repeat Steps 16 through 18 for the remaining planetary gears.
Remove sun gear (16) from planetary carrier (11).
Illustration 9 g00622132
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (22) and the washers.
Remove retainer (23) from piston (24).
Illustration 10 g00996858
If necessary, remove bearing cups (25) from retainer (23).
Remove seal ring (26) from the retainer.
Illustration 11 g00622156
Remove piston (24) and O-ring seal (27) from the housing.
Illustration 12 g00996860
Remove seal ring (28) from piston (24).
Illustration 13 g00819345
Remove spring (29) and ring (30) from housing (5).


Parts spring Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.