AVSPARE.COM
parts catalog

SPRING 0002794 - Caterpillar



0002794 SPRING Caterpillar parts SPRING
Rating:
36
Alternative (cross code) number:
CA0002794
000-2794
0002794
Caterpillar 0002794 SPRING
Weight: 2 pounds 1 kg.

Buy SPRING 0002794 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Inspect
Park the machine on level ground. Lower the dozer blade to the ground. Move the transmission control to the NEUTRAL position and engage the parking brake. Shut off the engine.
Open the engine enclosure.
Illustration 1 g01007135
Alternator only
Illustration 2 g01059010
Air conditioning
Inspect the condition of the serpentine belt (1). Belt deflection should not be more than 14 to 20 mm (.56 to .81 inch) under 110 N (25 lb) of force.. Measure between idler (4) and idler (5). Use a 144-0235 Belt Tension Gauge in order to measure the tension. Note: If a new belt is installed, recheck the belt adjustment after 30 minutes of operation. The deflection of the serpentine belt has the same limit with an alternator only.Note: This machine is equipped with one belt tensioner (2). The belt tensioner automatically adjusts the belt to the correct position.
Close the engine enclosure. Replace
Replace the belt if any of the following conditions exist:
excessive cracking
excessive wear
excessive damage
Park the machine on level ground. Lower the dozer blade to the ground. Move the transmission control to the NEUTRAL position and engage the parking brake. Shut off the engine.
Open the engine enclosure.
Turn the battery disconnect switch to the OFF position.
Remove the top bolt and the bottom nut assembly in order to remove alternator guard (7), if necessary.
Release the tension on serpentine belt (1). Insert a 12.7 mm (0.50 inch) ratchet into the square hole in the belt tightener (2) and pry the belt tightener in a counterclockwise direction.
Remove the belt from the pulleys. Feed the belt over the fan.
Install the new belt around the pulleys.
To achieve the correct belt tension, move the belt tightener (2) inward. Tighten belt tightener assembly (2) in place. Recheck the belt adjustment.
Turn the battery disconnect switch to the ON position.
Close the engine enclosure.


Parts spring Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.