SPRING WASHER 0848938 - Caterpillar

Separation Procedure
Illustration 1 g01377858
Place the piston pumps on suitable blocks.
Remove hose assemblies (1) and (5) from propel pumps (2) and (3) .
Remove nut (6) and rod (7) from propel pumps (2) and (3) .
Remove bolts (4). Use two people in order to separate piston pump (2) from piston pump (3). The weight of each piston pump is approximately 37 kg (82 lb).Connection Procedure
Illustration 2 g01377858
Make sure that the O-ring seal is in place. Use two people in order to connect piston pump (3) to piston pump (2). The weight of each piston pump is approximately 37 kg (82 lb). Install bolts (4) .
Install rod (7) and nut (6) .
Connect hose assemblies (5) and (1) to piston pumps (2) and (3) .