SPRING 0966825 - Caterpillar

0966825 SPRING Caterpillar parts 307, 307B, 307C, 308C, E70, E70B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA0966825
096-6825
0966825

Weight: 0.04 pounds 0 kg.

Buy SPRING 0966825 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, MINI HYD EXCAVATOR,

This part in 1 request: Show. This information for suppliers only!

#1605137 0966825

2025-11-16

Compatible equipment models: 0966825:

EXCAVATOR 307 E70 E70B

MINI HYD EXCAVATOR 307 307B 307C 308C Caterpillar

Number on catalog scheme: 12

For full view, you need register

Information:

Removal Procedure
Illustration 1 g02360136
Illustration 2 g02360156
Cut cable strap (1) and cable straps (5) from harness assembly (2). Note: Ensure that all cable straps are removed for the harness assembly.
Slide locking tab (3) into the unlocked position. Disconnect harness assembly (2) from harness assembly (4).
Make temporary marks on temperature sensor (6) for installation purpose. Remove temperature sensor (6) from the Diesel Oxidation Catalyst (DOC) (7).
Illustration 3 g02360176
Cut cable straps (10) from harness assembly (2). Note: Ensure that all cable straps are removed for the harness assembly.
Make temporary marks on flame detection sensor (8) for installation purpose. Remove flame detection sensor (8) from ARD combustion head (9).
Remove harness assembly (2) Clean Emission Module (CEM). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Bostik Pure Nickel
Anti-Seize Compound 1
B 5P-0325 Crowfoot Wrench 1
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 4 g02360136
Illustration 5 g02360156
Position harness assembly (2) onto the bracket for the CEM.
Use tooling (A) in order to lubricate the thread of temperature sensor (6).
Install temperature sensor (6) to the DOC. Note: Ensure correct positioning of temperature sensor.
Use tooling (B) in order to tighten temperature sensors (6) to a torque of 45 N m (33 lb ft).
Connect harness assembly (2) to harness assembly (4). Slide locking tab (3) into the locked position.
Install new cable strap (1) and cable strap (5) to harness assembly (2). Note: Ensure that cable straps meet the Original Equipment Manufactures (OEM) specification.
Illustration 6 g02360176
Use tooling (A) in order to lubricate the thread of flame detection sensor (8).
Install flame detection sensor (8) to the ARD combustion head (9). Note: Ensure correct positioning of the temperature sensor.
Use tooling (B) in order to tighten flame detection sensor (8) to a torque of 45 N m (33 lb ft).
Install new cable straps (10) to harness assembly (2). Note: Ensure that cable straps meet the Original Equipment Manufactures (OEM) specification.