1047295 SPRING Caterpillar parts
320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 330B
Rating:
Alternative (cross code) number:
CA1047295
104-7295
1047295
CA1047295
104-7295
1047295
Weight: 0.30 pounds 0 kg.
Information:
ACTUAL RATE
109.8
N/MM
FREE LENGTH
59.1
mm
OD
36
mm
SOLID LENGTH
43.8
mm
WIRE DIAMETER
6
mm
EXCAVATOR,
Compatible equipment models: 1047295:
Number on catalog scheme:
16
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01349116
Place clean engine oil on the O-ring seals. Install Tooling (A) and attach a suitable lifting device to engine oil pump (11). The weight of engine oil pump (11) is approximately 35 kg (76 lb).
Ensure that the splines on the shaft of engine oil pump (11) are correctly engaged with the splines of the engine oil pump drive gear. Install bolts (12) and (13).
Illustration 2 g01349115
Place clean engine oil on the O-ring seals and install tube (6) in elbow (7). Install elbow (7) on engine oil pump (11) with bolts (8).
Place clean engine oil on the O-ring seals and install tube (9) with flange (10) on the bonnet.
Illustration 3 g01349112
Install the gaskets and adapter (4) with bolts (1), (2), and (3).
Install bracket (5).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01349116
Place clean engine oil on the O-ring seals. Install Tooling (A) and attach a suitable lifting device to engine oil pump (11). The weight of engine oil pump (11) is approximately 35 kg (76 lb).
Ensure that the splines on the shaft of engine oil pump (11) are correctly engaged with the splines of the engine oil pump drive gear. Install bolts (12) and (13).
Illustration 2 g01349115
Place clean engine oil on the O-ring seals and install tube (6) in elbow (7). Install elbow (7) on engine oil pump (11) with bolts (8).
Place clean engine oil on the O-ring seals and install tube (9) with flange (10) on the bonnet.
Illustration 3 g01349112
Install the gaskets and adapter (4) with bolts (1), (2), and (3).
Install bracket (5).
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
0874758
SPRING
320 L, 322, 322 FM L, 322 LN, 325, 325 LN, 330, 330 FM L, 330 L
320 L, 322, 322 FM L, 322 LN, 325, 325 LN, 330, 330 FM L, 330 L
0998152
SPRING
330, 330 FM L, 330 L, E300B, OEMS
330, 330 FM L, 330 L, E300B, OEMS
0998142
SPRING-CYLINDER
330, 330 FM L, 330 L, E300B, OEMS
330, 330 FM L, 330 L, E300B, OEMS
0998173
SPRING-BRAKE
330, 330 FM L, 330 L, E300B, OEMS
330, 330 FM L, 330 L, E300B, OEMS
5I8651
SPRING
320 L, 325 L
320 L, 325 L
5I4431
SPRING
320 L, 330 L
320 L, 330 L
0964495
SPRING
320 L, 325, 325 L, 325 LN, E120B, E200B, OEMS
320 L, 325, 325 L, 325 LN, E120B, E200B, OEMS
4I7869
SPRING
320 L, 320N
320 L, 320N
4I7868
SPRING
320 L, 320N
320 L, 320N
1170282
SPRING
115, 320 L, H140DS
115, 320 L, H140DS
3Q7606
SPRING GUIDE
115, 320 L, H140CS
115, 320 L, H140CS
7I0976
SPRING
320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 330, 330 FM L, 330 L
320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 330, 330 FM L, 330 L