SPRING 1083064 - Caterpillar

(1) To be used for safe and easy disassembly and reassembly of travel motor. (2) To be used for holding together hub and spindle when disassembling and reassembling. (3) To be used for inserting spring, washers and snap ring into cylinder block.To be used for removing spring from cylinder block. (4) To be used for applying push to bearing when removing ball bearing from shaft. (5) To be used for pushing oil seal when installing it in spindle. (6) Shaft has to be turned slowly as a step for determining proper thickness of washer. For turning shaft, fit this tool onto splined end of shaft and apply torque to it. (7) To be used when fitting 46 steel balls on and along outer race already press-fitted into hub. (8) To be used for fitting 46 steel balls on and around outer race of the ball bearing already in place in hub. (9) To be used for removing oil seal from spindle.To be used for press-fitting ball bearing inner race into spindle.To be used for press-fitting ball bearing outer race into hub. (10) To be used for lifting cover off hub with a crane and sling. (11) To be used for lifting travel motor and spindle.A = M14 for travel motorA = M16 for spindle (12) To be used for removing ball bearing outer race from hub or for removing ball bearing inner race from spindle. (13) To be used for measuring preload of hub. (14) 1. To be used for removing bearing ball holder (II) from underside of ball bearing.2. To be used for removing ring from hub. (15) To be used for installing roller bearing inner race on crankshaft. The inner race is to be held in the heating oil of 100°C 10°C (212°F 18°F) for 10 minutes for shrink fitting. (16) To be used for pushing roller bearings onto crankshaft. (17) To be used for retaining valve seat when removing ring from slow return valve. (18) To be used for remove from slow return valve. (19) To be used for installing taper roller bearing onto crankshaft.To be used for confirming that the gear sub-assembly is positioned correctly in the spindle by tapping on and around the snap ring.