1110685 SPRING-DAMPER Caterpillar parts
994
Rating:
Alternative (cross code) number:
CA1110685
111-0685
1110685
CA1110685
111-0685
1110685
Weight: 0.33 pounds 0 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$23.70
31 Aug 2021
0.1763[0.08] Pounds
RU: Otado
New 125755mm Twill Weave Carbon Fiber Plate Panel Sheet
Letbobg Package Included: 1 x Carbon Fiber Plate Features: EEE It is an ideal material for contoured or angled cuts. EEE The "carbon fiber" look is maintained consistently on all curved surfaces. EEE It is also a good material for sculpting, jewelry making, or other craft projects.
Letbobg Package Included: 1 x Carbon Fiber Plate Features: EEE It is an ideal material for contoured or angled cuts. EEE The "carbon fiber" look is maintained consistently on all curved surfaces. EEE It is also a good material for sculpting, jewelry making, or other craft projects.
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 1110685:
Information:
Disassembly Procedure
Start By:
Remove the control manifold (pilot oil). Refer to Disassembly and Assembly, "Control Manifold (Pilot Oil) - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Illustration 1 g01211570
Remove bolts (1) and valve assembly (2).
Illustration 2 g01211571
Remove O-ring seals (3).
Repeat Steps 1 and 2 for the remaining valve assemblies.
Illustration 3 g01211572
Illustration 4 g01211575
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plugs (4) and (5).
Remove spool (6).
Remove spring (8) and spool (7).
Remove O-ring seals (9) from plugs (4) and (5).
Illustration 5 g01211576
Remove spring (10).
Start By:
Remove the control manifold (pilot oil). Refer to Disassembly and Assembly, "Control Manifold (Pilot Oil) - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Illustration 1 g01211570
Remove bolts (1) and valve assembly (2).
Illustration 2 g01211571
Remove O-ring seals (3).
Repeat Steps 1 and 2 for the remaining valve assemblies.
Illustration 3 g01211572
Illustration 4 g01211575
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plugs (4) and (5).
Remove spool (6).
Remove spring (8) and spool (7).
Remove O-ring seals (9) from plugs (4) and (5).
Illustration 5 g01211576
Remove spring (10).
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
9X9754
SPRING
5130, 5130B, 5230, 5230B, 785C, 785D, 789D, 793, 793B, 793C, 793D, 797, 797B, 994, 994D, 994F, 994H
5130, 5130B, 5230, 5230B, 785C, 785D, 789D, 793, 793B, 793C, 793D, 797, 797B, 994, 994D, 994F, 994H
3766589
SPRING
785C, 994, 994D, 994F, 994H
785C, 994, 994D, 994F, 994H
2V0037
SPRING
814B, 815B, 816B, 824C, 826C, 950B, 966D, 966F, 980C, 980F
814B, 815B, 816B, 824C, 826C, 950B, 966D, 966F, 980C, 980F
1017369
SPRING
994
994
1019618
SPRING
994
994
1180287
SPRING
814F, 815F, 816F, 994, 994D, 994F, 994H, D11R, D11T
814F, 815F, 816F, 994, 994D, 994F, 994H, D11R, D11T
994, 994D, 994F, 994H