SPRING 1166201 - Caterpillar

Illustration 11 g01371640
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.
No Clearance (10)This warning message is located on the fenders on both sides of the machine.
Illustration 12 g01053243
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Tailgate (11)This warning message is located on the rear of the machine on both sides of the tailgate.
Illustration 13 g01434621
The tailgate may move suddenly and without warning, resulting in personal injury or death. Insert tailgate locking pins before servicing or transporting machine.
Proper Connections for Jump Start Cables (12)This warning message is located on the front side of the hood on both sides of the machine.
Illustration 14 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Prop for the Cab (13)This warning message is located on the manual hand pump for tilting the cab.
Illustration 15 g01430342
Install cab prop pin before working under raised cab to prevent it from falling which could result in injury or death.
Product Link (14)If the machine is equipped with Product Link, this warning message is located in the cab.
Illustration 16 g01370917
This machine is equipped with a Caterpillar Product Link communication device which must be deactivated within 12 m (40 ft) of a blast zone. Failure to do so could result in serious injury or death.
ROPS Certification (15)This warning message is located on the back of the cab.
Illustration 17 g01131392
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.