1232025 SPRING Caterpillar parts
320B, 321B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 345B II, 345B II MH, W330B, W345B II
Rating:
Alternative (cross code) number:
CA1232025
123-2025
1232025
CA1232025
123-2025
1232025
Weight: 0.01 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 1232025:
Number on catalog scheme:
8
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Thoroughly clean the outer surfaces of the turbocharger (1).
Loosen the hose clamps and remove the air inlet hose at the turbocharger compressor housing. Note: Exhaust elbows are only an option for the four cylinder engines.
Remove the exhaust pipe from the turbocharger outlet or remove the exhaust pipe from the exhaust elbow. Refer to the OEM provided information for the correct procedure in order to remove the exhaust pipe.
Illustration 1 g01038600
Typical example
If an exhaust elbow is installed, remove the exhaust elbow. Refer to this Disassembly and Assembly Manual, "Exhaust Elbow - Remove and Install".
Remove the nuts (2) and remove the exhaust adapter (3) from the turbocharger (1).
Place a suitable container below the turbocharger (1) in order to collect any spillage of oil.
Illustration 2 g01038396
Typical example
Remove the banjo bolts (5). Remove the oil supply tube assembly (6) and the washers (7) from the turbocharger (1). Discard the washers (7). If necessary, remove the oil supply tube assembly (6) from the cylinder block and discard the washers.
Remove the setscrews (8). Remove the oil drain tube assembly (9) from the turbocharger (1). Remove the joint (10) and discard the joint. If necessary, remove the setscrews (11) and remove the oil drain tube assembly (9) from the cylinder block. Discard the joint.
If necessary, remove the studs (12) from the turbocharger housing. Note: Do not use the actuator rod of the wastegate (16) to lift the turbocharger (1).
Remove the nuts (13). Remove the turbocharger (1). Remove the gasket (14). Discard the gasket (14). If necessary, remove the studs (15) from the exhaust manifold.
Install suitable plastic plugs into the oil supply and into the oil drain ports of the turbocharger (1). Install suitable plastic covers to the inlet and to the outlet of the turbocharger (1). Install suitable plastic plugs to the oil supply tube assembly (6) and to the oil drain tube assembly (9). Install suitable plastic covers to the manifold ports.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Thoroughly clean the outer surfaces of the turbocharger (1).
Loosen the hose clamps and remove the air inlet hose at the turbocharger compressor housing. Note: Exhaust elbows are only an option for the four cylinder engines.
Remove the exhaust pipe from the turbocharger outlet or remove the exhaust pipe from the exhaust elbow. Refer to the OEM provided information for the correct procedure in order to remove the exhaust pipe.
Illustration 1 g01038600
Typical example
If an exhaust elbow is installed, remove the exhaust elbow. Refer to this Disassembly and Assembly Manual, "Exhaust Elbow - Remove and Install".
Remove the nuts (2) and remove the exhaust adapter (3) from the turbocharger (1).
Place a suitable container below the turbocharger (1) in order to collect any spillage of oil.
Illustration 2 g01038396
Typical example
Remove the banjo bolts (5). Remove the oil supply tube assembly (6) and the washers (7) from the turbocharger (1). Discard the washers (7). If necessary, remove the oil supply tube assembly (6) from the cylinder block and discard the washers.
Remove the setscrews (8). Remove the oil drain tube assembly (9) from the turbocharger (1). Remove the joint (10) and discard the joint. If necessary, remove the setscrews (11) and remove the oil drain tube assembly (9) from the cylinder block. Discard the joint.
If necessary, remove the studs (12) from the turbocharger housing. Note: Do not use the actuator rod of the wastegate (16) to lift the turbocharger (1).
Remove the nuts (13). Remove the turbocharger (1). Remove the gasket (14). Discard the gasket (14). If necessary, remove the studs (15) from the exhaust manifold.
Install suitable plastic plugs into the oil supply and into the oil drain ports of the turbocharger (1). Install suitable plastic covers to the inlet and to the outlet of the turbocharger (1). Install suitable plastic plugs to the oil supply tube assembly (6) and to the oil drain tube assembly (9). Install suitable plastic covers to the manifold ports.
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B, 325B L, 325C, 325C FM, 325D, 325D...
320 L, 320B, 320B FM LL, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
1090, 1190, 1190T, 1390, 2290, 2390, 322B L, 322C, 322C FM, 324D FM, 325 L, 325B L, 325C, 325C FM, 325C L, 511, 521, OEMS, TK711, TK721, TK741
322, 322 FM L, 322B, 322B L, 322B LN, OEMS
330, 330 FM L, 330B L, 330C FM, 330C L, 330C MH, 350, OEMS, TK1051
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 345B II, 345B II MH, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, TK1051, TK711, TK721, TK...
330, 330 FM L, 330 L, 330B, 330B L, OEMS
330, 330 FM L, 330 L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
330C, 330D, 330D L, 336D L, 336D LN, 336E, 345D, 349D L, OEMS
325C, 330C L
330, 330 FM L, 330 L, 330B, 330B L, 345B, 345B L, W330B
330C, 330C FM, 345B, 345B II, 345B II MH, 345B L
1090, 320 L, 320B, 320B U, 320N, 321B, 322, 322 FM L, 322B, 322B L, 322B LN, 325, 325B, 325B L, 330, 330 L, 330B, 330B L, 345B, 345B II, 345B II MH, 345B L, TK1051, TK711, TK721, TK722, TK732, W330B, ...
0874762
SPRING
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
0874763
SPRING
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330, 330B L, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, M325B, W330B, W345B II, W345C MH
1335392
SPRING
320B, 322B L, 322B LN, 325B L, 330B L, W330B
320B, 322B L, 322B LN, 325B L, 330B L, W330B
320 L, 320B, 320B FM LL, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, M325B, W330B
320B, 322B LN, 325B L, 330B L
3297253
SPRING
320B, 322B LN, 325B L, 330B L, 345B II, 345B L, 345C L
320B, 322B LN, 325B L, 330B L, 345B II, 345B L, 345C L
1687852
SPRING-GAS
1090, 1190, 1190T, 1290T, 1390, 322B L, 325B L, 330, 330 L, 330B L, 533, 543, HA770, HA771, HA870, HA871, TK1051, TK370, TK371, TK380, TK381, TK711, TK721, TK722, TK732, TK741, TK751, TK752
1090, 1190, 1190T, 1290T, 1390, 322B L, 325B L, 330, 330 L, 330B L, 533, 543, HA770, HA771, HA870, HA871, TK1051, TK370, TK371, TK380, TK381, TK711, TK721, TK722, TK732, TK741, TK751, TK752
1504559
SPRING
320D FM, 322B L, 322C FM, 325B L, 330B L, 525B, 525C, 525D, 535B, 535C, 535D, 539, 545, 545C, 545D, 554, 555D, 564, 574, 574B, 584, CTV15, CTV20, GH52, HH44 DE, HH45, HH500, HH55, HH65, HH75
320D FM, 322B L, 322C FM, 325B L, 330B L, 525B, 525C, 525D, 535B, 535C, 535D, 539, 545, 545C, 545D, 554, 555D, 564, 574, 574B, 584, CTV15, CTV20, GH52, HH44 DE, HH45, HH500, HH55, HH65, HH75
4I7790
SPRING
320 L, 322, 322 FM L, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330B L, 539, M325B, W330B
320 L, 322, 322 FM L, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330B L, 539, M325B, W330B
4I7792
SPRING
320 L, 320B, 322, 322 FM L, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330B L, 539, M325B, OEMS, W330B
320 L, 320B, 322, 322 FM L, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330B L, 539, M325B, OEMS, W330B