1321235 SPRING Caterpillar parts
D8R
Rating:
Alternative (cross code) number:
CA1321235
132-1235
1321235
CA1321235
132-1235
1321235
Weight: 0.06 pounds 0 kg.
Information:
ACTUAL RATE
8.86
N/MM
FREE LENGTH
90.98
mm
OD
13.31
mm
SOLID LENGTH
65.21
mm
WIRE DIAMETER
2.34
mm
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$37.82
20 Oct 2022
US: snahud
Replacement For 1321235 GPD New A/C AC O-Ring and Gasket Seal Kit for Chrysler Yorker Dynasty
Winvacco Replacement For 1321235 GPD New A/C AC O-Ring and Gasket Seal Kit for Chrysler Yorker Dynasty
Winvacco Replacement For 1321235 GPD New A/C AC O-Ring and Gasket Seal Kit for Chrysler Yorker Dynasty
$48.00
20 Oct 2022
US: AUTO COMMITTEE
O-Ring & Gasket Seal Kit fits - Yorker Dynasty 1321235
AUTO COMMITTEE Fix that squeaky brake, knocking engine, or clicking starter with Auto-Committee replacement parts to save money down the road. || Compatible: 1991-1993 Dynasty Base Dynasty LS 1990-1993 Imperial Base 1989 1994-1996 New Yorker Base 1989-1990 New Yorker Landau 1990-1993 New Yorker Fifth Avenue Salon 1988-1993 Dynasty Base 1988-1990 Dynasty LE || High-Tech materials provides unmatched reliability and performance. Direct replacement to your original unit. || Aftermarket Parts. NOT an OEM. || If there are any questions as to this product, please contact us directly for technical support. Check the compatibility list for applications. Please verify your requirements or contact us before ordering.
AUTO COMMITTEE Fix that squeaky brake, knocking engine, or clicking starter with Auto-Committee replacement parts to save money down the road. || Compatible: 1991-1993 Dynasty Base Dynasty LS 1990-1993 Imperial Base 1989 1994-1996 New Yorker Base 1989-1990 New Yorker Landau 1990-1993 New Yorker Fifth Avenue Salon 1988-1993 Dynasty Base 1988-1990 Dynasty LE || High-Tech materials provides unmatched reliability and performance. Direct replacement to your original unit. || Aftermarket Parts. NOT an OEM. || If there are any questions as to this product, please contact us directly for technical support. Check the compatibility list for applications. Please verify your requirements or contact us before ordering.
$12.58
20 Oct 2022
1.0[0.45] Pounds
US: Shop Eddies ???
Global Parts Distributors - 89-96 New Yorker (1321235)
Global Parts Distributors 1321235 || 89-96 NEW YORKER || Meets or exceeds OEM Specifications
Global Parts Distributors 1321235 || 89-96 NEW YORKER || Meets or exceeds OEM Specifications
Number on catalog scheme:
20
For full view, you need register
Compatible equipment models: 1321235:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M14 x 1.5 by 100 mm 1
B 227-4393 E18 Torx Socket 1
C 8T-3052 Degree Wheel 1
D - Guide Studs
M12 x 1.75 by 50 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02368018
Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from damage.
Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.f in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft adapter (4) onto a suitable support.
Install Tooling (D) crankshaft adapter (4) .
Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
Install bolts (7) to the crankshaft pulley assembly.Note: Evenly space bolts (7) around the crankshaft pulley assembly.
Remove Tooling (D) .
Tighten bolts (7) to a torque of 115 N m (85 lb ft).
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
Install crankshaft pulley assembly (2) onto the crankshaft.
Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M14 x 1.5 by 100 mm 1
B 227-4393 E18 Torx Socket 1
C 8T-3052 Degree Wheel 1
D - Guide Studs
M12 x 1.75 by 50 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02368018
Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from damage.
Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.f in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft adapter (4) onto a suitable support.
Install Tooling (D) crankshaft adapter (4) .
Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
Install bolts (7) to the crankshaft pulley assembly.Note: Evenly space bolts (7) around the crankshaft pulley assembly.
Remove Tooling (D) .
Tighten bolts (7) to a torque of 115 N m (85 lb ft).
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
Install crankshaft pulley assembly (2) onto the crankshaft.
Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
9V7187
SPRING
834B, 836
834B, 836
1646511
SPRING
824G, 825G, 826G, 834G, 836G
824G, 825G, 826G, 834G, 836G
1541389
SPRING
824G, 825G
824G, 825G
1610223
SPRING
824G, 825G, 834G
824G, 825G, 834G
1302315
SPRING
824G, 825G, 826G
824G, 825G, 826G
1181721
SPRING
824G, 824G II, 825G, 825G II, 826G, 826G II
824G, 824G II, 825G, 825G II, 826G, 826G II
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 24H, D...
1457450
SPRING
D10R
D10R
1144652
SPRING
D10R, D10T, D10T2
D10R, D10T, D10T2
1109283
SPRING-DISC
D10R, D10T
D10R, D10T
2448990
SPRING AS
D10N, D10R
D10N, D10R
D8R, D8R II