SPRING 1517494 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Required Parts
Table 1
542-1547 Auxiliary Control Ar (Tool Control) (- 02)
Qty Part No. Description Media
(1) 533-1781 Film Gp -
(1) 525-7681 Front Lines Gp M0085405
(1) 492-2066 Front Lines Gp M0081917
(1) 491-6992 Oil Cooler Lines Gp M0081919
(1) 532-0153 Valve Gp M0081915
(1) 490-2713 Chassis Wiring Gp M0081911
(1) 490-2714 Valve Wiring Gp M0081913
(1) 524-4392 Wiring Mounting Gp M0085407
(1)(1) 557-7502 Pilot Lines Gp M0091492
(1) 533-1276 Film -
Standard Removal
(A) 492-0412 Pilot Lines Gp -
(B) 491-6991 Oil Cooler Lines Gp -
(1) FOR USE WITH EXISTING HEAVY LIFT CIRCUIT.
Illustration 2 g06225780
Standard removal parts shown in red.
Remove pilot lines group (A) and oil cooler lines group (B) before installing this kit on your machine.Installation of the Films
Illustration 3 g06317509
533-1781 Film Gp
(1) 250-8054 Hammer Film
(2) 260-6941 Controls Film
Illustration 4 g06317508
(3) 533-1276 FilmInstallation Section
Illustration 5 g06246079
Removal of oil tank (C) and fuel tank (D).
Note: For Tool Control -When installing the main valves, the oil tank (C) and fuel tank (D) must be drained and removed from the machine due to minimal clearance for the bolt heads on the main valve and the tanks.Reference: Disassembly and Assembly, M0080364Tuning Section
Reference: M0081160, "Systems Operation Testing and Adjusting".