SPRING 1536849 - Caterpillar

Attach Safety Lanyard (If Equipped) (12)This safety message is located next to the lanyard fixing points.
Illustration 16 g02726642
Falling Hazard. May cause personal injury or death. Always attach safety lanyard to appropriate fixing point.
Aerosol Starting Aid (13)This warning is located on the engine air filter housing.
Illustration 17 g01372254
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Starting" for the proper starting procedure.Hot Surface (14)This warning is located on the each engine access door.
Illustration 18 g03720081
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Hot Surface (15)This warning is located next to the cooling system pressure cap.
Illustration 19 g01371640
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.
Crushing Hazard (16)This warning label is located on the left rear and right rear of the upper structure.
Illustration 20 g01374060
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
Crushing Hazard (17)This safety message is located on each side of the stick.
Illustration 21 g01385579
A crushing hazard exists when the stick and boom are in motion and when the machine is being used in object handling applications. Failure to stay clear of the stick and boom when the machine is in operation can result in personal injury or death. Stay clear of the stick and boom when the machine is in operation.
Falling Object Guard Structure (18)This safety message is located on the upper right corner of the falling object guard structure that is on the front of the cab. This safety message is also located on the top rear of the falling object guard structure that is on the top of the cab.
Illustration 22 g02428757
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.