1686730 SPRING GP-RECOIL Caterpillar parts
311C
Rating:
Alternative (cross code) number:
CA1686730
168-6730
1686730
CA1686730
168-6730
1686730
EXCAVATOR,
Compatible equipment models: 1686730:
Number on catalog scheme:
1
For full view, you need register
Information:
Connection Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 308-3470 Jack Stand Gp 1
B 260-9412 Chain As 1
C 4C-5593 Anti-Seize Compound -
Illustration 1 g01917978
Illustration 2 g01962013
Note: Check the location of marking (X) on the ends of the cartridge pin. The marking on the cartridge pin should be perpendicular to the rail of the outer track link that will be pushed. If the orientation is not correct, rotate the cartridge pin to the correct position.Note: The cartridge pin and clamp master links must be free of paint and debris.
Attach Tooling (B) in order to position the track.
Apply Tooling (C) to bores of clamp master links (5) and the collars of the cartridge pins. Install clamp master links (5) .
Illustration 3 g01917977
Illustration 4 g01918133
Note: Do not reuse track bolts. Because the track bolts have been torqued to a yield, the bolts can only be used one time. Failure to replace the track bolts with new track bolts could result in damage to the machine.
Use two people in order to install track shoe (4) . The weight of track shoe (2) is approximately 27 kg (60 lb). Apply Tooling (C) to the threads and face of bolts (3) . Install track shoe (4) and bolts (3) . Tighten bolts (3) in numerical order. Tighten bolts (3) to a torque of 550 70 N m (405 50 lb ft). Tighten bolts (3) to an additional turn of 180 degrees.
Illustration 5 g01876457
Remove Tooling (A) .
Illustration 6 g01876456
Tighten relief valve (2) . Tighten relief valve (2) to a torque of 34 7 N m (25 5 lb ft).
Tighten the track tension. Refer to Operation and Maintenance Manual, "Track - Check/Adjust".
Illustration 7 g01876455
Install cover (1) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 308-3470 Jack Stand Gp 1
B 260-9412 Chain As 1
C 4C-5593 Anti-Seize Compound -
Illustration 1 g01917978
Illustration 2 g01962013
Note: Check the location of marking (X) on the ends of the cartridge pin. The marking on the cartridge pin should be perpendicular to the rail of the outer track link that will be pushed. If the orientation is not correct, rotate the cartridge pin to the correct position.Note: The cartridge pin and clamp master links must be free of paint and debris.
Attach Tooling (B) in order to position the track.
Apply Tooling (C) to bores of clamp master links (5) and the collars of the cartridge pins. Install clamp master links (5) .
Illustration 3 g01917977
Illustration 4 g01918133
Note: Do not reuse track bolts. Because the track bolts have been torqued to a yield, the bolts can only be used one time. Failure to replace the track bolts with new track bolts could result in damage to the machine.
Use two people in order to install track shoe (4) . The weight of track shoe (2) is approximately 27 kg (60 lb). Apply Tooling (C) to the threads and face of bolts (3) . Install track shoe (4) and bolts (3) . Tighten bolts (3) in numerical order. Tighten bolts (3) to a torque of 550 70 N m (405 50 lb ft). Tighten bolts (3) to an additional turn of 180 degrees.
Illustration 5 g01876457
Remove Tooling (A) .
Illustration 6 g01876456
Tighten relief valve (2) . Tighten relief valve (2) to a torque of 34 7 N m (25 5 lb ft).
Tighten the track tension. Refer to Operation and Maintenance Manual, "Track - Check/Adjust".
Illustration 7 g01876455
Install cover (1) .
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
311C, 312C L, 314C
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303, 304, 305, 311C, 311D LRR, 312C L, 312D, 312D L, 312D2, 313D, 314C, 314D CR, 314D LCR, 315B FM L, 315C, 320B FM LL, 320C, 320C FM, 320...
311, 311B, 311C, 312, 312B, 312B L, 313B, E110B, E120B
303, 303.5C, 303.5D, 303.5E, 303C CR, 304, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 32...
307C, 308C, 311B, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L...
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
311, 311B, 311C, 312, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
311C, 312C L, 314C
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318D L, 318D2 L,...
311C, 312C L, 314C
2256870
SPRING AS-GAS
PM3516
PM3516
2487247
SPRING GP-RECOIL
320C, 320C FM
320C, 320C FM
1501081
SPRING GP-RECOIL
304.5
304.5
1722106
SPRING GP-RECOIL
303.5
303.5
2398247
SPRING GP-RECOIL
D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
2327685
SPRING GP-RECOIL
301.6C
301.6C
325D FM, 325D FM LL, 330D FM, 330D L, 330D MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 568 FM LL
2322327
SPRING & MTG GP-LEVELER
PC206, PC310B
PC206, PC310B
2500691
SPRING GP-CAB DOOR
R2900G, R3000H
R2900G, R3000H
2394333
SPRING GP-RECOIL
330C L
330C L