SPRING 1767512 - Caterpillar

Illustration 1 g01269377
Level 1 engine oil pressure versus engine speed
Illustration 2 g01269382
Level 2 engine oil pressure versus engine speed
Illustration 3 g01269384
Level 3 engine oil pressure versus engine speedSystem Response:360-1The warning lamp will flash while the warning is active.The Electronic Control Module (ECM) will generate a 46 flash code that will be displayed via the diagnostic lamp.The ECM will generate a E360-1 event code.The ECM will generate a SPN 100-FMI 17 event code on the J1939 data link. The event code may be displayed on a receiving device on the J1939 data link.360-2The warning lamp will flash while the derate is active.The ECM will generate a 46 flash code that will be displayed via the diagnostic lamp.The ECM will generate a E360-2 event code.The electronic service tool will display "Engine Derate" in the first "Engine Status" box on any status screen on the electronic service tool.The ECM will generate a SPN 100-FMI 18 event code on the J1939 data link. The event code may be displayed on a receiving device on the J1939 data link.360-3The warning lamp will flash.The ECM will generate a 46 flash code that will be displayed via the diagnostic lamp.The ECM will generate a E360-3 event code.The ECM will generate a SPN 100-FMI 01 event code on the J1939 data link. The event code may be displayed on a receiving device on the J1939 data link.360-1Engine operation is not affected.360-2The ECM will derate power by 17.0 percent per second up to a maximum of 100 percent while the derate is active.Note: The derate of the engine will only occur if the "Enable Derate" customer programmable parameter has been enabled.360-3The engine will shut down.Note: The shutdown of the engine will only occur if the "Enable Shutdown" customer programmable parameter has been enabled. Test Step 1. Refer to Troubleshooting, "Low Engine Oil Pressure".Results:
OK - STOP