1N8547 SPRING Caterpillar parts
1693, D343
Rating:
Alternative (cross code) number:
CA1N8547
1N-8547
1N8547
CA1N8547
1N-8547
1N8547
Weight: 0.02 pounds 0 kg.
INDUSTRIAL ENGINE, TRUCK ENGINE,
Compatible equipment models: 1N8547:
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove" for the correct procedure.
Remove the engine oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove" for the correct procedure.
If the engine has an accessory drive, remove the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive - Remove and Install" for the correct procedure.
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove" for the correct procedure.
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install" for the correct procedure.
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03430098
Remove bolts (2) that secure bypass tube (1) to front housing (3).
Remove bypass tube (1) from the cylinder head. Remove O-ring (4) and O-ring (5) from bypass tube (1).
Illustration 2 g03378762
Remove bolts (6), bolts (7), and bolts (8) from front housing (3). Note: The bolts are different lengths. Note the positions of the different length bolts.
Remove front housing (3) from the cylinder block.
Remove gasket (10).
If necessary, follow Step 6.a through Step 6.b in order to remove bearing (9) from housing (3).
Place housing (3) onto a suitable support.
Use a suitable tool in order to press bearing (9) out of housing (3).
Illustration 3 g03378764
Remove thrust washer (11) from the cylinder block.
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove" for the correct procedure.
Remove the engine oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove" for the correct procedure.
If the engine has an accessory drive, remove the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive - Remove and Install" for the correct procedure.
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove" for the correct procedure.
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install" for the correct procedure.
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03430098
Remove bolts (2) that secure bypass tube (1) to front housing (3).
Remove bypass tube (1) from the cylinder head. Remove O-ring (4) and O-ring (5) from bypass tube (1).
Illustration 2 g03378762
Remove bolts (6), bolts (7), and bolts (8) from front housing (3). Note: The bolts are different lengths. Note the positions of the different length bolts.
Remove front housing (3) from the cylinder block.
Remove gasket (10).
If necessary, follow Step 6.a through Step 6.b in order to remove bearing (9) from housing (3).
Place housing (3) onto a suitable support.
Use a suitable tool in order to press bearing (9) out of housing (3).
Illustration 3 g03378764
Remove thrust washer (11) from the cylinder block.
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
5S1754
SPRING
16, 1693, 657, 769, 988, D343
16, 1693, 657, 769, 988, D343
9F7650
SPRING
D326F, D337F, D343, D353C
D326F, D337F, D343, D353C
16, 1693, 631C, 641, 651, 657, 657B, 666, 768B, 769, 824, 824B, 825B, 826B, 834, 953C, 983, 988, D343, G343
140, 141, 1673, 183, 183B, 191, 561C, 583H, 657, 977K, D330A, D342, D342C, D7F, D8H
1A1884
SPRING
988, D337, D342, D342C, D8H, D8K, G342C
988, D337, D342, D342C, D8H, D8K, G342C
3192, 7211
2L4033
SPRING
D379A, D399
D379A, D399
D326F, D342, D342C, D343, D348, D353C, D379A, D398, D398A, D399
4L6962
SPRING
D342C
D342C
1693, 621, 641, 651, 657, 666, 769, 824, 980, D342C, D343, D353C
D315, D342, D342C
14E, 7211, 7261, 7271, 793C, 793D, 977K, D6C, SPF343C, TH48-E80