SPRING 1U2760 - Caterpillar

1U2760 SPRING Caterpillar parts D10, D11N, D7G, D8L, D9L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1U2760
1U-2760
1U2760

Weight: 0.20 pounds 0 kg.

Information:

ACTUAL RATE 10.8 N/MM

FREE LENGTH 61.9 mm

OD 38.1 mm

SOLID LENGTH 25.61 mm

WIRE DIAMETER 3.77 mm

Buy SPRING 1U2760 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Show more prices Caterpillar parts

Compatible equipment models: 1U2760:

TRACK-TYPE TRACTOR D10 D11N D7G D8L D9L Caterpillar

Number on catalog scheme: 16

For full view, you need register

Information:

If any part of the oil pump is worn enough in order to affect the performance of the oil pump, the oil pump must be replaced.Perform the following procedures in order to inspect the oil pump. Refer to Specifications, "Engine Oil Pump" for clearances and torques.
Illustration 1 g00938064
Typical example
Remove the oil pump from the engine. Remove the cover of the oil pump.
Remove the outer rotor (1). Clean all of the parts. Look for cracks in the metal or other damage.
Install the outer rotor. Measure the clearance of the outer rotor to the body .
Illustration 2 g00938061
Typical example
Measure the clearance of the inner rotor to the outer rotor (2).
Illustration 3 g00938799
End play measurement of the rotor
Measure the end play of the rotor with a straight edge and a feeler gauge (3).
Clean the top face of the oil pump and the bottom face of the cover. Install the cover on the oil pump. Install the oil pump on the engine.