SPRING 2375409 - Caterpillar

ACTION REQUIRED
Refer to the attached Rework Procedure.
Before completing the attached Rework Procedure, review the safety actions in the engine Operation and Maintenance Manual. If the engine is installed in a machine, read and understand the machinery operator's manual for safety information and safe working practices before starting the Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-2000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-4000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Before Going to Machine:
1. Ensure you have all the applicable software files as called out in the "Parts Needed" before going to the machine.
2. Ensure that the Communications Adapter has the latest firmware updates and PC drivers, and that ET is updated to the latest available version.
Note: Communications Adapter and ET news, drivers, and firmware are available at https://dealer.cat.com.
Update Procedure:
Note: Create a full Product Status Report (PSR) and ECM replacement files for the Engine ECM, BEFORE performing the update, as some configurations and settings could be erased during the software installation process. This will allow a point of reference to restore the settings of the engine after the update.
1. Before updating the software, run a Product Status Report (PSR) and save the report for reference.
2. Before updating the software, save ECM replacement files for each ECM. (In Cat ET: Use Service -> Copy Configuration -> ECM Replacement, click "Yes" to load from ECM, select the correct ECM, then save to file.)
3. Reload each ECM with the ECM replacement file that was downloaded from TMI date stamped 2015-08-20.
Retain the existing PSR and ECM replacement file for your records.