SPRING AS 2448990 - Caterpillar

Illustration 1 g03321924
Table 1
Specification for 367-6681 Bucket Cylinder Gp    
Item     Qty     Part     Specification Description    
1     2     117-9435 Bushing     Bore before installation is
60.18 0.02 mm (2.369 0.001 inch).
Installation depth is
7.5 0.3 mm (0.30 0.01 inch).    
A     1     368-3284 Hydraulic Cylinder     Bore is
90.06 0.04 mm (3.546 0.002 inch).    
B     1     296-3274 Cylinder Rod and Bearing As     Diameter is
64.93 0.03 mm (2.556 0.001 inch).    
C     1     121-1994 Head     Bore over two lands for rod assembly is
65.53 0.03 mm (2.580 0.001 inch).    
2     1     143-8149 Special Locknut     Before assembly, lubricate the face and thread with 309-6932 Hydraulic Oil.
Torque to
2800 140 N m (2065 103 lb ft).    
3     1     099-6976 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
4     1     099-6973 Seal As     Lubricate the inside diameter and the outside diameter with clean grease.    
5     1     105-2630 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
6     1     114-0754 Bushing     Outside diameter is
70.120 0.025 mm (2.7606 0.0010 inch).
Thickness is
2.475 0.025 mm (0.0974 0.0010 inch).    
7     1     170-9840 Buffer Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
8     1     170-9856 U-Cup Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
9     1     165-9282 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
10     -     -     Apply green Loctite 609 to wiper seal groove before assembly.    
11     10     3E-6910 Bolt     Torque to
130 20 N m (96 15 lb ft).