SPRING 2483284 - Caterpillar

Illustration 11 g03566371
View of the rear of the box assembly (2) 341-0103 Connector (3) 3D-2824 O-Ring Seal (4) 8C-8417 Connector (5) 6V-9746 O-Ring Seal (6) 110-5897 Connector (7) 4I-7745 Connector (8) 6V-8398 O-Ring Seal (9) 8C-3443 Connector (10) 7M-8485 O-Ring Seal (11) 5K-9090 O-Ring Seal (12) 7X-2470 Adapter (13) 2S-4078 O-Ring Seal
Install all connectors, adapters, and O-Ring seals shown in Illustration 11 to the rear of the box assembly. The following components are required:
One connector (2)
Five O-Ring seals (3)
One connector (4)
Two O-Ring seals (5)
One connector (6)
One connector (7)
One O-Ring seal (8)
Two connectors (9)
Two O-Ring seals (10)
Two O-Ring seals (11)
One adapter (12)
One O-Ring seal (13)
Illustration 12 g03566141
View of the front of the bumper
Secure the box assembly, with all adapters connected, to the top of the front bumper with the retained mounting hardware.
Illustration 13 g03566372
(1) 5T-7005 Block (14) 6V-4590 O-Ring Seal (15) 8T-5041 Bolt (16) 8T-4223 Hard Washer (17) 6F-8146 O-Ring Seal (18) 4J-0524 O-Ring Seal (19) 125-6729 Cover (20) 8T-8917 Bolt
Connect the tube assembly for the fuel to the box assembly by using block (1), O-Ring seal (14), four bolts (15), eight hard washers (16), O-Ring seal (17), O-Ring seal (18), cover (19), and four bolts (20) .
Connect the remaining hose assemblies to the appropriate adapters on the rear of the box assembly.
Connect any previously disconnected harness assemblies.