SPRING GP-RECOIL 2979275 - Caterpillar

Connect one end of hose assembly (79) onto hose assembly (75) using rectangular seal (50), two half flanges (81), four bolts (80), and four hard washers (19).
Connect other end of hose assembly (79) onto tee assembly (60) using O-ring seal (58).
Secure hose assemblies (12) and (79) using two clips (44), Grommet (77), Grommet (46), two clips (45), bolt (47), two hard washers (19), and nut (78).
Illustration 25 g06095120
(4) 7X-2553 Bolt
(63) 9X-8257 Washer
(66) 485-0361 Bracket
(67) 485-0360 Plate As
(68) 485-0362 Bracket
(69) 8T-4779 Bolt
Install top plate assembly (67) and bracket (66) onto NEEF using two bolts (4) and two washers (63).
Install bottom bracket (68) onto NEEF using two bolts (69) and two washers (63).
Illustration 26 g06095121
(35) 8T-4136 Bolt
(70) 7X-7729 Washer
(71) 458-9901 Clamp
(72) 480-1570 Hydraulic Accumulator Gp
Install hydraulic accumulator group (72) onto the plate assembly using clamp (71), two bolts (35), and two washers (70).
Secure bottom of hydraulic accumulator group (72) using two bolts (35) and two washers (70).
Illustration 27 g06095122
(7) 8T-4139 Bolt
(19) 8T-4223 Hard Washer
(27) 1P-3704 Rectangular seal
(72) 480-1570 Hydraulic Accumulator Gp
(73) 7Y-4538 Half Clamp
(74) 5C-4580 Spacer
(76) 8T-4176 Bolt
(82) 485-0364 Tube As
Install tube assembly (82) onto hydraulic accumulator group (72) using rectangular seal (27), spacer (74), four bolts (76), and four hard washers (19).
Secure tube assembly (82) using two half clamps (73), two bolts (7), and two hard washers (19).
Illustration 28 g06095124
(12) 373-1974 Tube As
(19) 8T-4223 Hard Washer
(44) 5P-7468 Clip
(45) 5P-7469 Clip
(46) 8T-2525 Grommet
(47) 8T-4183 Bolt
(50) 1P-3703 Rectangular seal
(58) 5K-9090 O-Ring Seal
(60) 148-8445 Tee As
(75) 485-0363 Tube As
(77) 5P-8444 Grommet
(78) 329-3356 Nut
(80) 8T-4184 Bolt
(81) 6V-0400 Half Flange
(83) 485-0366 Hose As
Connect one end of hose assembly (83) onto hose assembly (75) using rectangular seal (50), two half flanges (81), four bolts (80), and four hard washers (19).
Connect other end of hose assembly (83) onto tee assembly (60) using O-ring seal (58).
Secure hose assemblies (12) and (75) using two clips (44), Grommet (77), Grommet (46), two clips (45), bolt (47), two hard washers (19), and nut (78).
Illustration 29 g06095125
(63) 9X-8257 Washer
(84) 415-4047 Bracket As
(85) 7X-2552 Bolt
Install bracket assembly (84) onto the NEEF using two bolts (85) and two washer (63).
Illustration 30 g06095126
(19) 8T-4223 Hard Washer
(21) 8T-4244 Nut
(84) 415-4047 Bracket As
(86) 8X-3467 Stud As
Install stud assembly (86) onto bracket assembly (84) using two hard washers (19) and two nuts (21).