2F4615 SPRING Caterpillar parts
1693, 651, 657, 666, 824, 955C, D315, D326F, D337, D337F, D342, D342C, D343, D353C
Rating:
Alternative (cross code) number:
CA2F4615
2F-4615
2F4615
CA2F4615
2F-4615
2F4615
Weight: 0.01 pounds 0 kg.
INDUSTRIAL ENGINE, WHEEL TRACTOR,
Compatible equipment models: 2F4615:
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
Personal injury or death can occur from heavy components falling during removal or installation.Properly support the component with a suitable lifting device during removal or installation.
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Refer to Operation and Maintenance Manual, "Cable (Truck Body Retaining )".
Refer to Operation and Maintenance Manual, "System Pressure Release".
Illustration 1 g01998123
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) in order to pull a vacuum on the hydraulic system.
Illustration 2 g03429504
Disconnect hose assemblies (1), clips (2), and hose assemblies (3) .
Illustration 3 g03429509
Disconnect harness assembly (4) .
Remove bolts (5). Remove solenoid and manifold valve (6) .Installation Procedure
Install solenoid and manifold valve (6) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
Personal injury or death can occur from heavy components falling during removal or installation.Properly support the component with a suitable lifting device during removal or installation.
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Refer to Operation and Maintenance Manual, "Cable (Truck Body Retaining )".
Refer to Operation and Maintenance Manual, "System Pressure Release".
Illustration 1 g01998123
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) in order to pull a vacuum on the hydraulic system.
Illustration 2 g03429504
Disconnect hose assemblies (1), clips (2), and hose assemblies (3) .
Illustration 3 g03429509
Disconnect harness assembly (4) .
Remove bolts (5). Remove solenoid and manifold valve (6) .Installation Procedure
Install solenoid and manifold valve (6) in the reverse order of removal.
Cat SIS web machinery list:
Parts spring Caterpillar catalog:
1090, 1140, 1150, 1160, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14G, 14H, 14H NA, 14M, 16,...
1140, 1160, 14E, 16, 1673B, 1673C, 1676, 1693, 16G, 215, 245, 3208, 3304, 3306, 3406, 3408, 3412, 3508B, 3512, 594, 621, 631C, 631D, 633C, 633D, 637D, 651E, 657B, 657E, 769C, 772, 777, 824, 824B, 941,...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
120G, 12G, 130G, 140G, 14E, 14G, 14H, 14H NA, 16, 160G, 16G, 16H, 16H NA, 24H, 24M, 30/30, 3192, 517, 527, 561M, 561N, 572R, 572R II, 583T, 589, 611, 613G, 615C, 621, 621B, 621E, 621F, 621G, 623E, 623...
517, 527, 561B, 561C, 561D, 561M, 571G, 572G, 572R, 578, 583H, 583K, 583R, 587R, 589, 594, 931B, 931C, 933, 935B, 939, 955C, 955H, 955L, 977H, 977K, 977L, 983B, D10, D10N, D11N, D3, D326F, D342, D4D, ...
120, 16, 1673, 1673B, 1673C, 1674, 1676, 1693, 16G, 245, 3304, 3306, 3406, 3408, 3412, 561C, 621, 621B, 621R, 623, 627, 631C, 633C, 637D, 641B, 650B, 651E, 657B, 657E, 768B, 772, 777, 814, 824B, 826B,...
16, 631C, 633C, 651, 657, 824, 825B, D343, D353C, D6C, D6D, D6D SR, D6E SR, D6G SR
561C, 561D, 572G, 651, 955L, D5, D5B, D5E, D7G, D7G2
941, 951B, 955C, 955H, 955K, 955L, D4D, D4E
9M4173
SPRING
1693, 641, 651, 657, 666, 769, D343, D8H, D9H
1693, 641, 651, 657, 666, 769, D343, D8H, D9H
561C, 571G, 572G, 594, 594H, D326F, D337, D342, D353C, D364, D375D, D397D, D9E
173B, 183B, 215, 225, 231D, 235, 3192, 613, 613B, 613C, 613C II, 621, 631C, 641, 641B, 650B, 651, 657B, 666, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 768B, 769, 769C, 769D, 771C, 771D, 772, 773, 77...
215, 225, 231D, 235, 3192, 613B, 613C, 613C II, 641, 657B, 666, 769, 772, 777, 814, 950, 955H, 955K, 955L, 966C, 977H, 977K, 983, D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400, D44B, D550B
6L2499
SPRING
3406, D342, D342C
3406, D342, D342C
955H, D379, D379A, D379B, D398, D399, D4E
D348, D398
7L0128
SPRING
D348, D398
D348, D398
3S3018
SPRING
14E, 641B, 650B, 772, 777, 992, D10, D346, D348, D349
14E, 641B, 650B, 772, 777, 992, D10, D346, D348, D349
2M5809
SPRING
12E, D326F, D342, D353C, D375D
12E, D326F, D342, D353C, D375D
2M5815
SPRING
D326F, D342, D353C
D326F, D342, D353C
2M5820
SPRING
D326F, D342, D353C
D326F, D342, D353C