SPRING A. 2H3332 - Caterpillar

Disassembly Procedure
Start By:
Remove the stabilizer control valve. Refer to Disassembly and Assembly, "Control Valve (Stabilizer) - Remove".Note: This component is being disassembled and displayed for CLEANING PURPOSES ONLY. Many internal parts are not available for this component. Care must be taken during disassembly and assembly in order to prevent damage to unavailable parts.
Illustration 1 g01124471
Remove bolts (1). Remove bracket assembly (2) .
Illustration 2 g01124473
Illustration 3 g01124477
Remove screws (3) and bolts (4). Remove control valve (5) .
Illustration 4 g01124497
Remove O-ring seals (6) from control valve (5) .
Illustration 5 g01124500
Remove nuts (9). Remove manifold (8). Remove bank valve (7) .
Illustration 6 g01124506
Remove screw (12). Remove bolts (10). Remove cover (11) .
Illustration 7 g01124510
Remove seal (13) .
Illustration 8 g01124516
Illustration 9 g01124523
Remove spool assembly (14) and plug assemblies (15) .
Remove O-ring seals (16) .
Illustration 10 g01124528
Illustration 11 g01124531
Remove plug assembly (17) .
Remove O-ring seal (18) .
Illustration 12 g01124533
Remove control valve (19) .
Repeat Step 5 through Step 10 in order to disassemble control valve (19) .