SPRING 2I9528 - Caterpillar

Introduction
This information will assist in the installation of the coolant bottle mounting brackets 438-3234 Bracket As and 438-3237 Bracket As .Required Parts
Table 1
Required Parts List    
Item     Qty     Part Number     Part Name    
1     1     124-1479     Clip    
2     1     438-3234     Bracket As    
3     1     438-3237     Bracket As    
4     1     5P-9299     Clip    
5     8     8T-4121     Hard Washer    
6     3     8T-4136     Bolt    
7     1     8T-4137     Bolt    
8     4     8T-4196     Bolt    
9     1     9X-8250     Clip    Machine Preparation
Park the machine in a smooth surface.
Turn the engine start switch OFF position.
Turn the battery disconnect switch to the OFF position. Place lockout/tag out in the battery disconnect switch.
Illustration 1 g00104545
Attach a "Do not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment or before you repair the equipment. These warning tags are available from your Cat dealer.Removal Procedure
ReferenceRefer to Disassembly and Assembly, KENR5582, "Radiator Group - Remove and Install" for instructions on removing the old tank reservoir.Installation Procedure
Illustration 2 g03392057
Illustration 3 g03392056
438-3234 Bracket As
Install 438-3234 Bracket As to the top of the cooling package.
Illustration 4 g03392059
438-3234 Bracket As
Install the old tank reservoir onto 438-3234 Bracket As .
Install 438-3237 Bracket As around the old tank reservoir.
Reconnect hoses and secure all lines.