SPRING 2K0841 - Caterpillar

Illustration 16 g00486202
Remove spring (27) from valve (11) .
Remove slug (28) from spool (25) .
Illustration 17 g00486207
Illustration 18 g00486208
Reposition valve (11) on a bench, as shown.
Remove piston (29) from valve (11) .
Remove spacers (30) from the inside diameter of piston (29) .
Remove spring (31) and spring (32) from valve (11) .Note: Keep the outside diameter of the spool (33) aligned with the bore of valve (11). Avoid damaging or scratching the finished surfaces of spool (33) and of the bore of valve (11) .
Remove spool (33) from valve (11) .
Remove slug (34) from spool (33) .
Illustration 19 g00486216
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove retaining ring (38), retainer (37), spring (36) and ball (35) from spool (33) .
Illustration 20 g00486381
Remove stop (39) and spool (40) from valve (11) .
Illustration 21 g00486501
Illustration 22 g00486503
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove retaining ring (41), two retainers (42) and spring (43) from spool (40) .
Illustration 23 g00486508
Remove plate (12) from valve (44) .
Remove two plugs (45) from plate (12). Check the condition of the O-ring seals on each plug (45). Replace damaged seals with new parts.
Illustration 24 g00486540
Illustration 25 g00486541
Remove the bolts and cover (46) from valve (44). Check the condition of O-ring seal (47). Replace damaged seals with new parts.
Remove stop (48) from valve (44) .
Remove spool (52) from valve (44) .
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove retaining ring (49), two retainers (50) and spring (51) from spool (52) .