3237599 SPRING-CHECK VALVE Caterpillar parts
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL
Rating:
Alternative (cross code) number:
CA3237599
323-7599
3237599
CA3237599
323-7599
3237599
Weight: 0.01 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3237599:
Number on catalog scheme:
10
For full view, you need register
Information:
Reference: Refer to Tool Operating Manual, NEHS1087 for operating instructions for the 348-5430 Multi-Tool Gp.Note: Use Software License Card, NETG5049 with part number 348-5430 Multi-Tool Gp.Machine Preparation
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 5 g02280104
Position the machine on level ground in the service position. Refer to Illustration 5.
Stop the engine.
Release the pressure in the hydraulic system. Refer to Testing and Adjusting, "System Pressure - Release".
Attach 311-1362 Vacuum Cap onto the hydraulic tank. Attach an air supply hose onto the assembly. Apply 276 to 414 kPa (40 to 60 psi). This procedure will pull a vacuum on the hydraulic system.
Illustration 6 g03818757
Pump compartment
(1) Pressure tap (delivery pressure for drive pump)
(2) Pressure tap (delivery pressure for idler pump)
Connect 41,368 kPa (6,000 psi) pressure sensors to pressure tap (1) and pressure tap (2) for delivery pressure from both pumps.
Illustration 7 g03680344
Flow meter tool layout at boom foot
Tooling D
(3) Boom cylinder
(4) Tube (discharge ports for boom cylinder head end)
(5) Tube (discharge ports for boom cylinder rod end)
(6) Hose (boom cylinder rod end)
(7) Hose (boom cylinder head end)
(8) Hose (boom cylinder head end)
(9) Hose (boom cylinder rod end)
(10) Flange
(11) Washer
(12) Bolt
Install the following tools in accordance with the flow meter tool layout. Refer to Illustration 7.
Disconnect hose (8) and hose (9) from the tubes at the boom foot.
Install seal (D11) and blocking cover (D12) to the two discharge ports at the boom foot. Use the existing flanges, bolts, and washers.
Install seal (D11) and blocking cover (D12) on the two boom cylinder hoses. Use half flange (D13), washer (D14) and bolt (D15).
Disconnect hose (6) and hose (7) from the tubes at the boom foot.
Install seal (D11) and blocking cover (D12) on the two boom cylinder hoses. Use half flange (D13), washer (D14) and bolt (D15).
Install seal (D11), adapter (D10), O-ring seal (D4), and coupler assembly (D5) to tube (4) and tube (5). Use the existing flanges, bolts, and washers.
Remove 311-1362 Vacuum Cap and install the filler plug for the hydraulic tank.
Connect portable hydraulic tester (D1) and the test hoses between coupler assembly (D5) on tube (4) and coupler assembly (D5) on tube (5). Note: In order to avoid damage to the flow meter, make sure that the direction of oil flow is correct. The proper direction of flow is from tube (4) for the boom cylinder head end, through portable hydraulic tester (D1), and return through tube (5) for the boom cylinder rod end.Test Procedure
To prevent personal injury or equipment damage from failure of the hydraulic test equipment or associated circuit components because of blocked pump flow, make sure that the test equipment valves are fully open before starting
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 5 g02280104
Position the machine on level ground in the service position. Refer to Illustration 5.
Stop the engine.
Release the pressure in the hydraulic system. Refer to Testing and Adjusting, "System Pressure - Release".
Attach 311-1362 Vacuum Cap onto the hydraulic tank. Attach an air supply hose onto the assembly. Apply 276 to 414 kPa (40 to 60 psi). This procedure will pull a vacuum on the hydraulic system.
Illustration 6 g03818757
Pump compartment
(1) Pressure tap (delivery pressure for drive pump)
(2) Pressure tap (delivery pressure for idler pump)
Connect 41,368 kPa (6,000 psi) pressure sensors to pressure tap (1) and pressure tap (2) for delivery pressure from both pumps.
Illustration 7 g03680344
Flow meter tool layout at boom foot
Tooling D
(3) Boom cylinder
(4) Tube (discharge ports for boom cylinder head end)
(5) Tube (discharge ports for boom cylinder rod end)
(6) Hose (boom cylinder rod end)
(7) Hose (boom cylinder head end)
(8) Hose (boom cylinder head end)
(9) Hose (boom cylinder rod end)
(10) Flange
(11) Washer
(12) Bolt
Install the following tools in accordance with the flow meter tool layout. Refer to Illustration 7.
Disconnect hose (8) and hose (9) from the tubes at the boom foot.
Install seal (D11) and blocking cover (D12) to the two discharge ports at the boom foot. Use the existing flanges, bolts, and washers.
Install seal (D11) and blocking cover (D12) on the two boom cylinder hoses. Use half flange (D13), washer (D14) and bolt (D15).
Disconnect hose (6) and hose (7) from the tubes at the boom foot.
Install seal (D11) and blocking cover (D12) on the two boom cylinder hoses. Use half flange (D13), washer (D14) and bolt (D15).
Install seal (D11), adapter (D10), O-ring seal (D4), and coupler assembly (D5) to tube (4) and tube (5). Use the existing flanges, bolts, and washers.
Remove 311-1362 Vacuum Cap and install the filler plug for the hydraulic tank.
Connect portable hydraulic tester (D1) and the test hoses between coupler assembly (D5) on tube (4) and coupler assembly (D5) on tube (5). Note: In order to avoid damage to the flow meter, make sure that the direction of oil flow is correct. The proper direction of flow is from tube (4) for the boom cylinder head end, through portable hydraulic tester (D1), and return through tube (5) for the boom cylinder rod end.Test Procedure
To prevent personal injury or equipment damage from failure of the hydraulic test equipment or associated circuit components because of blocked pump flow, make sure that the test equipment valves are fully open before starting
Cat SIS web machinery list:
Parts spring Caterpillar catalog:
303, 303.5C, 303.5D, 303.5E, 303C CR, 304, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2...
318B, 318C, 318E L, 319D, 319D L, 319D LN, 320 L, 320C, 320C FM, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 320N, 321C, 321D LCR, 32...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 32...
307C, 308C, 311B, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, ...
318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
325D FM, 325D FM LL, 330D FM, 330D L, 330D MH, 336D L, 336D LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 521B, 568 FM LL
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B, 325B L, 325C, 325C FM, 325D, 325D...
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 350, 568 FM LL, M330D, W345C MH
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
330C, 330D, 330D L, 336D L, 336D LN, 336E, 345D, 349D L, OEMS
2851418
SPRING-RETURN
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL
1943283
SPRING
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 511, 521, 521B...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 511, 521, 521B...
1929208
SPRING
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 511, 521, 521B...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 511, 521, 521B...
1946979
SPRING
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 511, 521, 521B...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 511, 521, 521B...
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 350, 568 FM LL, M330D, W345C MH
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B, 325B L, 325C, 325C FM, 325D, 325D...
2597513
SPRING-CHECK VALVE
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL
3527059
SPRING-RETURN
320C, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 3...
320C, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 3...
3527058
SPRING-RETURN
320C, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 3...
320C, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 3...
3350246
SPRING
336E, 336E L, 336E LN, 568 FM LL
336E, 336E L, 336E LN, 568 FM LL
2597385
SPRING-RETURN
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL
2597509
SPRING-RETURN
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 568 FM LL