SPRING 3G8416 - Caterpillar

Table 10
Technical Specifications
Description PLG641 PLG601
Ethernet 10/100 Mbit/s 10/100 Mbit/s
3G/GSM/GPRS Five Band 3G/UMTS (WCDMA/FDD): 850/800, 900, 1900, 2100 MHz Quad-Band GSM/GPRS: 850, 900, 1800, 1900 MHz NA
Antenna Connector Mobile SMA female NA
GPS Built-in NA
Antenna Connector GPS SMA female (active or passive antenna) NA
USB Interface Micro USB, USB 2.0 Micro USB, USB 2.0
Relay Output
(max 24 VDC, 1A) 1 1
Digital Inputs (dry contact) 2 (DI 1 - LPM, DI2 - configurable)(1) 2 (DI 1 - LPM, DI2 - configurable) (1).
Analog Inputs
(PT100 (-50°C to +150°C), 0-10 VDC ( 2%), or 0-20 mA ( 3.5%)) 4 (AI 1-4: 0-10 VDC or 0-20 mA)
AI 1&3: PT100 4 (AI 1-4: 0-10 VDC or 0-20 mA)
AI 1&3: PT100
Serial Port #1 RS232 (1.2 kbit/s to 115.2kbit/s) RS232 (1.2 kbit/s to 115.2kbit/s)
Serial Port #2 RS485 (1.2 kbit/s to 115.2kbit/s) RS485 (1.2 kbit/s to 115.2kbit/s)
CAN J1939 Port 4-pin terminal block 4-pin terminal block
Protocols Modbus RTU, Modbus TCP, CAN J1939 Modbus RTU, Modbus TCP, CAN J1939
Mechanical Dimensions
(Z,X,Y) 25.6 mm (1.00787 inch), 135 mm (5.31495 inch), 92 mm (3.62204 inch) 25.6 mm (1.00787 inch), 135 mm (5.31495 inch), 92 mm (3.62204 inch)
Operating Temperature −40° C (−40.00000° F) to +65° C (+149.00000° F) −40° C (−40.00000° F) to +65° C (+149.00000° F)
Storage Temperature −45° C (−49.00000° F) to +85° C (185.00000° F) −45° C (−49.00000° F) to +85° C (185.00000° F)
Humidity Range 5-95%, RH, non-condensing 5-95%, RH, non-condensing
Power Supply 9-32 VDC, 6W, LPS 9-32 VDC, 6W, LPS
Power Consumption
(max at 24 VDC) 4.5W 2.5W
Housing Metal, IP20 Metal, IP20
(1) Digital input 1 +/- is a dedicated input used for triggering low-power mode (LPM) on the device.PLG6x1 LED Definitions
Table 11
LED Name Color Indication
Modem (PLG641 only) OFF Modem disabled.
Steady red Modem failure
Flashing red SIM card failure / SIM card not inserted
Steady orange PIN code enabled on SIM card
Flashing orange No APN specified
Steady green Modem registered with a data connection
Flashing green Modem is searching for mobile network
CAN OFF CAN not configured
Steady red Port failure/ CAN initialization failure
Steady green CAN initialization successful
RS485/RS232 OFF Port disabled
Steady red Port failure/ Modbus RTU initialization failure
Steady green Modbus RTU Initialization Successful
Uplink / WAN Only on during Power Up Self-Test Self-Test
Gateway OFF Unit has no power, or is starting up
Steady green Normal operation
Flashing green Firmware update in progress
Steady red Hardware failure
Flashing red Application failure
Power OFF No power
Steady green Unit has power
Ethernet Link
(on RJ-45 ports) OFF No network detected
Orange flicker Activity on 10 Mbps Ethernet network
Green flicker Activity on 100 Mbps Ethernet network PLG6x1 Connector Pinouts
PLG641
Illustration 20 g06100790
PLG601
Illustration 21 g06100791