3H2757 SPRING Caterpillar parts
12E, 41, D348, D349, D379A, D399, G379, G398
Rating:
Alternative (cross code) number:
CA3H2757
3H-2757
3H2757
CA3H2757
3H-2757
3H2757
Weight: 0.08 pounds 0 kg.
Information:
ACTUAL RATE
3.0467
N/MM
FREE LENGTH
101.6
mm
OD
28.9814
mm
SOLID LENGTH
28.575
mm
WIRE DIAMETER
2.6797
mm
GAS ENGINE, MOTOR GRADER,
Compatible equipment models: 3H2757:
Information:
Flash the Software onto the Display
The display is shipped without the application software installed. Use the following procedure in order to flash the application software into the display.Required Material
Caterpillar Electronic Technician (CAT ET)
Communication Adapter
345-7489 Monitor Harness AsRequired Software
Table 1
Part Number System Notes
440-2674 Object Detection System Radar and Vision
440-2677 Object Detection System (Vision Only) Vision Perform the following procedure in order to flash program the ECM. The ECM is flashed in order to upgrade the software. Flash programming of the ECM must be done if the ECM has been replaced. Caterpillar Electronic Technician (Cat ET) contains the program WinFlash. WinFlash is used in order to load the software into the ECM. The following procedure is used in order to flash the software into the display.Procedure
Ensure that the key start switch and the disconnect switch are in the OFF position.
Disconnect the center 12-pin connector from the display.
Connect the 345-7489 Monitor Harness As that is supplied with the cab kits between the following:
System harness for the display and the center connector on the display.
Connect the 7X-1425 Data Link Cable As between the 7X-1700 Communication Adapter Gp and Cat ET.
Connect the 139-4166 Data Link Cable As between the 7X-1700 Communication Adapter Gp and the diagnostic connector of the machine.
Use WinFlash in order to load the software.
Disconnect the 345-7489 Monitor Harness As that is supplied with the cab kits from the following:
System harness for the display and the center connector on the display.
Connect the 12-pin connector of the system harness to the center connector of the display.
Turn the disconnect switch and the key start switch to the ON position.
Verify that the display turns ON and the Caterpillar Object Detection application launches.
The display is shipped without the application software installed. Use the following procedure in order to flash the application software into the display.Required Material
Caterpillar Electronic Technician (CAT ET)
Communication Adapter
345-7489 Monitor Harness AsRequired Software
Table 1
Part Number System Notes
440-2674 Object Detection System Radar and Vision
440-2677 Object Detection System (Vision Only) Vision Perform the following procedure in order to flash program the ECM. The ECM is flashed in order to upgrade the software. Flash programming of the ECM must be done if the ECM has been replaced. Caterpillar Electronic Technician (Cat ET) contains the program WinFlash. WinFlash is used in order to load the software into the ECM. The following procedure is used in order to flash the software into the display.Procedure
Ensure that the key start switch and the disconnect switch are in the OFF position.
Disconnect the center 12-pin connector from the display.
Connect the 345-7489 Monitor Harness As that is supplied with the cab kits between the following:
System harness for the display and the center connector on the display.
Connect the 7X-1425 Data Link Cable As between the 7X-1700 Communication Adapter Gp and Cat ET.
Connect the 139-4166 Data Link Cable As between the 7X-1700 Communication Adapter Gp and the diagnostic connector of the machine.
Use WinFlash in order to load the software.
Disconnect the 345-7489 Monitor Harness As that is supplied with the cab kits from the following:
System harness for the display and the center connector on the display.
Connect the 12-pin connector of the system harness to the center connector of the display.
Turn the disconnect switch and the key start switch to the ON position.
Verify that the display turns ON and the Caterpillar Object Detection application launches.
Cat SIS web machinery list:
Parts spring Caterpillar catalog:
4M1815
SPRING-CONTACT
1090, 1190, 1190T, 1290T, 12E, 130G, 140G, 1673C, 1676, 16G, 245, 24H, 3176C, 3196, 3204, 3208, 330 L, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3456...
1090, 1190, 1190T, 1290T, 12E, 130G, 140G, 1673C, 1676, 16G, 245, 24H, 3176C, 3196, 3204, 3208, 330 L, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3456...
9M4685
SPRING
12E, 16, 572G, 583K, 621, 631C, 633C, 641B, 650B, 657B, 666B, 772, 773, 777, 8D, 951B, 955H, 977H, 983, 992, D330A, D333A, D342C, D346, D348, D349, D6C, D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP...
12E, 16, 572G, 583K, 621, 631C, 633C, 641B, 650B, 657B, 666B, 772, 773, 777, 8D, 951B, 955H, 977H, 983, 992, D330A, D333A, D342C, D346, D348, D349, D6C, D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP...
4M5923
SPRING
594, 955H, 977H, 983, D10, D348, D349, D7F, D8H, D8K
594, 955H, 977H, 983, D10, D348, D349, D7F, D8H, D8K
8M8597
SPRING
225, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637E, 637G, 950, 955L, D348, D349, D398, D399, D6C, D6D
225, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637E, 637G, 950, 955L, D348, D349, D398, D399, D6C, D6D
5F5559
SPRING
120B, 12E, 140B, 183, 225, 225D, 229, 229D, 231D, 561C, 572G, 583H, 594, CB-534B, CB-534C, CB-634, CB-634C, CB-634D, D7F, D8H
120B, 12E, 140B, 183, 225, 225D, 229, 229D, 231D, 561C, 572G, 583H, 594, CB-534B, CB-534C, CB-634, CB-634C, CB-634D, D7F, D8H
1B4446
SPRING
120, 120B, 12E, 140, 140B, 14E, 561B, 561C, 572G, 583H, 594, 594H, 977D, D4D, D4E, D4E SR, D5
120, 120B, 12E, 140, 140B, 14E, 561B, 561C, 572G, 583H, 594, 594H, 977D, D4D, D4E, D4E SR, D5
5H3729
SPRING
120B, 12E, 140B, 14E
120B, 12E, 140B, 14E
4B8312
SPRING
120B, 12E, 140B
120B, 12E, 140B
4D3267
SPRING
120B, 12E, 140B
120B, 12E, 140B
6L3891
SPRING (1800 - 2000 R.P.M.)
D343, D348
D343, D348
6L3890
SPRING (1500 - 1700 R.P.M.)
D343, D348
D343, D348
6F6678
SPRING
183B, 46, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, D348, G343
183B, 46, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, D348, G343
7S6746
SPRING
120B, 1674, 3306, 561C, 777, 920, 941, 966C, 992, D346, D348, D379B, D4D, D5B, D6C, D6D, G399
120B, 1674, 3306, 561C, 777, 920, 941, 966C, 992, D346, D348, D379B, D4D, D5B, D6C, D6D, G399
3S1252
SPRING
594H, D353C, D379A, D379B, D398, D398A, D398B, D399, D9G, D9H
594H, D353C, D379A, D379B, D398, D398A, D398B, D399, D9G, D9H
4S6526
SPRING
1673, 1673B, 1673C, 1674, 1693, 3304, 3306, 814, 950, 966C, 977H, 980B, D330B, D4D, D7G
1673, 1673B, 1673C, 1674, 1693, 3304, 3306, 814, 950, 966C, 977H, 980B, D330B, D4D, D7G
1L9308
SPRING
3181, D346, D348, D353C, D375D
3181, D346, D348, D353C, D375D
3L3275
SPRING
D346, D348, D353C, D375D
D346, D348, D353C, D375D
3L3266
SPRING
D346, D348, D353C, D375D
D346, D348, D353C, D375D
4L6773
SPRING
D346, D348, D379, D379A, D379B, D398, D398B, D399
D346, D348, D379, D379A, D379B, D398, D398B, D399
5S9606
SPRING
578, 650B, 657B, 931B, 992, D348, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D6H, D6H XL, D6H XR, D7H, D7R, D8R
578, 650B, 657B, 931B, 992, D348, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D6H, D6H XL, D6H XR, D7H, D7R, D8R
4L5848
SPRING
D379A, D399, G379, G398
D379A, D399, G379, G398