SPRING AS-GAS 4161060 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00678475
Disconnect tube assembly (2) from primary fuel filter base (1).
Illustration 2 g00678476
Remove bolts (4) from the fuel priming pump (3).
Remove fuel priming pump (3) from the primary fuel filter base.
Illustration 3 g00678479
Remove bolt (5) from the primary fuel filter base.
Remove filter element (6) and housing (7) from the primary fuel filter base.
Illustration 4 g00773124
Remove bolts (8) from the primary fuel filter base (1).
Remove primary fuel filter base (1) from the engine. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g00773124
Install bolts (8) that secure primary fuel filter base (1) to the engine.
Illustration 6 g00678479
Install filter element (6) and housing (7) to the primary filter base with bolt (5).
Illustration 7 g00678476
Install bolts (4) that secure fuel priming pump (3) to the primary fuel filter base.
Illustration 8 g00678475
Connect tube assembly (2) to primary fuel filter base (1).