4V6186 SPRING Caterpillar parts
980C, 980F, 980F II, 992C, 992D
Rating:
Alternative (cross code) number:
CA4V6186
4V-6186
4V6186
CA4V6186
4V-6186
4V6186
Weight: 0.03 pounds 0 kg.
WHEEL LOADER,
Number on catalog scheme:
5
For full view, you need register
Information:
Personal injury or death can result from sudden movement of the lift or tilt cylinders.Sudden movement up or down, can cause the clearance above your head to change rapidly.Do not stand under the lift arms when testing and adjusting the lift cylinders.Do not stand under the bucket when testing or adjusting the tilt cylinder.
Specifications
Table 1
Lift and Tilt Cylinder Drift Rate
Description Oil Temp Max Drift Time in Minutes
Lift Cylinder
38 3°C (100 5°F)
13 mm (0.51 inch) 5.0 (1)
49° 3°C (120° 5°F)
13 mm (0.51 inch) 2.7 (1)
66° 3°C (150° 5°F)
13 mm (0.51 inch) 1.7 (1)
Tilt Cylinder
38 3°C (100 5°F)
19 mm (0.75 inch) 5.0 (1)
49° 3°C (120° 5°F)
19 mm (0.75 inch) 2.7 (1)
66° 3°C (150° 5°F)
19 mm (0.75 inch) 1.7 (1)
( 1 ) Values are for a machine fitted with an empty general-purpose bucketIntroduction
The following procedure will check the drift rate of the lift and tilt cylinders.Check Preparation
Move the machine to a flat open area so that the lift arms can be fully raised.
Engage the parking brake. Place wheel blocks in front of the wheels and behind the wheels.
Stop the engine.
Install the steering frame lock. ReferenceRefer to Operation and Maintenance Manual, "Steering Frame Lock" for the machine being serviced.
Start the engine and warm up the hydraulic oil.Note: The hydraulic oil must be at normal operating temperature in order to obtain an accurate reading.
If the machine is equipped with the optional ride control system, press the ride control switch to the OFF position.Check Procedure - Lift Cylinder
Extend and retract the lift cylinders five or more times in order to ensure that warm oil fills the lift cylinders.
Raise the lift arms to the full RAISED position, then move the joystick control lever to the HOLD position.
Turn the engine start switch to the OFF position.
Record the position of a lift cylinder rod.
Measure and record the distance that the lift cylinder rod moves.
Refer to Table 1 for the maximum
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
16, 525B, 525C, 535B, 535C, 545, 545C, 611, 613G, 615, 615C, 772, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
613C, 621E, 631E, 641B, 657, 769C, 769D, 771C, 771D, 772, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777D, 784B, 785B, 789B, 793B, 793C, 920, 926, 930, 936F, 950, 950F, 950F II, 966C, 966D, 966F, 966F I...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 518, 518C, 528, 528B, 530B, 611, 613, 613B, 613C, 613C II, 613G, 615, 615C, 621, 621B, 627B, 814, 814B, 814F, 814F II, 815, 815B, 815F, 815F II, 816F, 816F II, 8...
627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637, 637B, 637D, 637E, 637G, 814, 814B, 815B, 824, 824B, 824C, 826C, 834, 834B, 836, 950B, 950F, 966C, 966D, 966F, 980, 980B, 980C, 980F, 988, 988B, ...
910, 920, 930, 930R, 950, 980, 980B, 988B, 992, 992C
16, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 826C, 834B, 836, 936, 950, 950F, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 966C, 966F, 966F II, 966G, 966G II, 966H, 9...
24H, 814F, 815F, 816F, 824G, 825G, 826G, 844, 844H, 844K, 854G, 854K, 936F, 950F, 950F II, 960F, 966F, 966F II, 970F, 980F, 980F II, 980G, 980G II, 988F, 988F II, 990, 990 II, 990H, 990K, 992D, 992G, ...
824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 980C, 980F, 980F II, 980G, 980G II, 9...
824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 980C, 980F, 980F II, 980G, 980G II, 9...
772, 773, 825C, 826C, 980C, 992, 992C, 992D
772, 773, 825C, 826C, 834B, 980C, 988B, 988F, 992, 992C, 992D, R2900, R2900G, R3000H
120G, 12G, 130G, 140G, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 988B, 992C, 994
834B, 836, 988B, 988F, 988F II, 992C, 992D, 994, 994D
772, 773, 825C, 826C, 834B, 980C, 988B, 988F, 992, 992C, 992D, R2900, R2900G, R3000H
772, 773, 825C, 826C, 980C, 992, 992C, 992D
14E, 16, 824B, 825B, 834, 988, 988B, 992, 992C
988, 988B, 992, 992C, 992D
988, 988B, 992C, 994
4J3302
SPRING
16, 824, 824B, 834, 834B, 836, 988, 988B, 988F, 988F II, 992C, 992D
16, 824, 824B, 834, 834B, 836, 988, 988B, 988F, 988F II, 992C, 992D
16, 824, 824B, 834, 834B, 836, 988, 988B, 988F, 988F II, 992C, 992D
4J6802
SPRING
16, 824, 824B, 834, 834B, 836, 988, 988B, 988F, 988F II, 992C, 992D, 994, 994D
16, 824, 824B, 834, 834B, 836, 988, 988B, 988F, 988F II, 992C, 992D, 994, 994D
4T2541
SPRING
834B, 836, 988B, 988F, 988F II, 992C, 992D, R1700 II
834B, 836, 988B, 988F, 988F II, 992C, 992D, R1700 II
14E, 16, 824B, 834, 834B, 836, 988, 988B, 988F, 988F II, 992C, 992D, R1700 II