5M9813 SPRING Caterpillar parts
12E, 561B, 561D, 955H, D4D, D4E, D5B, D6D, D6E
Rating:
Alternative (cross code) number:
CA5M9813
5M-9813
5M9813
CA5M9813
5M-9813
5M9813
Weight: 0.06 pounds 0 kg.
Information:
END CONFIGURATION
2
INITIAL TENSION
4.45
N
LENGTH
73.66
mm
OD
17.27
mm
SPRING RATE
10.96
MOTOR GRADER, TRACK-TYPE TRACTOR,
Compatible equipment models: 5M9813:
Number on catalog scheme:
3
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1 Start By:
Remove the accessory drive for the engine oil pump and the water pump. Refer to Disassembly and Assembly, "Accessory Drive (Front) - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06183005
Remove O-ring seal (3) from pump adapter assembly (2).
Use Tooling (A) and a suitable press to remove sleeve bearing (1) from pump adapter assembly (2).
Illustration 2 g06183010
Remove bolts (5).
Remove thrust washers (6) from pump adapter assembly (4).
Remove pump adapter assembly (4) from pump drive shaft (7).
Illustration 3 g06183012
Remove bolts (8).
Remove accessory drive gear (9) from pump drive shaft (7).
If necessary, remove the socket setscrew from the end of pump drive shaft (7).
Illustration 4 g06183041
Remove O-ring seal (11) and O-ring seal (12) from pump adapter assembly (4).
Use Tooling (A) and a suitable press to remove sleeve bearing (10) from pump adapter assembly (4).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1 Start By:
Remove the accessory drive for the engine oil pump and the water pump. Refer to Disassembly and Assembly, "Accessory Drive (Front) - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06183005
Remove O-ring seal (3) from pump adapter assembly (2).
Use Tooling (A) and a suitable press to remove sleeve bearing (1) from pump adapter assembly (2).
Illustration 2 g06183010
Remove bolts (5).
Remove thrust washers (6) from pump adapter assembly (4).
Remove pump adapter assembly (4) from pump drive shaft (7).
Illustration 3 g06183012
Remove bolts (8).
Remove accessory drive gear (9) from pump drive shaft (7).
If necessary, remove the socket setscrew from the end of pump drive shaft (7).
Illustration 4 g06183041
Remove O-ring seal (11) and O-ring seal (12) from pump adapter assembly (4).
Use Tooling (A) and a suitable press to remove sleeve bearing (10) from pump adapter assembly (4).
Cat SIS web machinery list:
Parts spring Caterpillar catalog:
7F7237
SPRING
16, 44, D6D
16, 44, D6D
955K, 955L
951B, D5B
951B, D5B
941, D4D, D4E
941, D4D, D4E
9J6423
SPRING
955K, 955L, 977K, 983
955K, 955L, 977K, 983