SPRING 6B8809 - Caterpillar

Illustration 74 g01512018
Install ring gear (24) .
Illustration 75 g01512013
Install spacer (23) . Install retaining ring (22) .
Illustration 76 g01511995
Install plates (19) and discs (18) . Install dowels (20) . Install springs (21) .
Illustration 77 g01518762
Install ring seal (16) and ring seal (15) onto piston (17) .Note: Lubricate the sealing lip lightly with the lubricant that is being sealed.
Illustration 78 g01518774
Illustration 79 g01518775
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install piston (17) into clutch housing (13) . Use Tooling (A) , Tooling (H) , and a suitable lifting device in order to install piston (17) and clutch housing (13) . The weight of piston (17) and clutch housing (13) is approximately 54 kg (120 lb). Install bolts (14) . Tighten bolts (14) to a torque of 115 7 N m (85 5 lb ft).
Illustration 80 g01518780
Use Tooling (A) and a suitable lifting device in order to turn over planetary assembly (12) . The weight of planetary assembly (12) is approximately 605 kg (1333 lb).
Illustration 81 g01511449
Install O-ring seal (11) . Install O-ring seal (10) .
Illustration 82 g01511416
Install retaining ring (9) .
Illustration 83 g01511395
Use Tooling (A) and a suitable lifting device in order to install housing (7) . The weight of housing (7) is approximately 112 kg (246 lb). Install bolts (8) .
Illustration 84 g01511373
Install O-ring seals (6) . Install sleeves (5) .
Illustration 85 g01511359
Use Tooling (A) and a suitable lifting device in order to install valve assembly (3) . The weight of valve assembly (3) is approximately 23 kg (50 lb). Install bolts (4) .
Illustration 86 g01501919
Install tube assembly (2) . Use Tooling (A) and a suitable lifting device in order to remove transmission assembly (1) from Tooling (B) . The weight of transmission assembly (1) is approximately 748 kg (1650 lb).End By:
Connect the transmission to the output transfer gears. Refer to Disassembly and Assembly, "Transmission and Transfer Gears - Connect".
Connect the transmission to the input transfer gears. Refer to Disassembly and Assembly, "Transmission and Transfer Gears - Connect".