6E2157 SPRING Caterpillar parts
320 L, 320B, 320B FM LL, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, M325B, W330B
Rating:
Alternative (cross code) number:
CA6E2157
6E-2157
6E2157
CA6E2157
6E-2157
6E2157
Weight: 0.14 pounds 0 kg.
Information:
ACTUAL RATE
.63
N/MM
FREE LENGTH
45.5
mm
OD
16.5
mm
SOLID LENGTH
9.14
mm
WIRE DIAMETER
1.1
mm
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 6E2157:
Number on catalog scheme:
14
For full view, you need register
Information:
Removal Procedure
The element filter has a fuel filter element in a filter case. The element filter is combined with the fuel priming pump.Removal Procedure for the Element Filter
Note: There is an option for the three cylinder engine. The fuel filter and the fuel priming pump can be installed onto the application rather than onto the engine. If this is the case, refer to the appropriate OEM information as well to this text.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01010637
Typical example
Illustration 2 g01010595
Typical example
Place a suitable container below the filter in order to collect the spilled fuel. Thoroughly clean the outside surfaces of the fuel filter. Open the drain (1) in order to drain the fuel from the filter.
Use a suitable strap wrench to loosen the filter case (2). Remove the filter case (2) from the filter head (5).
Push down against the spring pressure that is applied to the filter element (4). Rotate the filter element (4) counterclockwise in order to release the filter element from the filter case (2).
Discard the filter element (4) and the O-ring (3). Installation Procedure
The element filter has a fuel filter element in a filter case that combined with the fuel priming pump.Installation Procedure for the Element Filter
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01010637
Typical example
Illustration 4 g01010595
Typical example
Thoroughly clean the inside of the filter case (2) and thoroughly clean the lower face of the filter head (5).
Inspect the thread of a new filter element (4) in order to ensure that the thread is not damaged. Inspect the thread of the adapter in the filter head (5) in order to ensure that the thread is not damaged.
Inspect the condition of the spring and ensure that the spring is correctly located within the filter case (2).
Install the new filter element (4) into the filter case (2). Push the filter element against the spring pressure and rotate the filter element in a clockwise direction in order to secure the filter element within the filter case (2).
Lightly lubricate a new O-ring (3) with clean fuel oil. Install the new O-ring (3) into the recess within the filter case (2).
Close the drain (1).
Remove the air from the fuel system. Refer to the Operations and Maintenance Manual, "Fuel System - Prime". Remove the suitable container and dispose of the fuel that has drained as waste.
The element filter has a fuel filter element in a filter case. The element filter is combined with the fuel priming pump.Removal Procedure for the Element Filter
Note: There is an option for the three cylinder engine. The fuel filter and the fuel priming pump can be installed onto the application rather than onto the engine. If this is the case, refer to the appropriate OEM information as well to this text.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01010637
Typical example
Illustration 2 g01010595
Typical example
Place a suitable container below the filter in order to collect the spilled fuel. Thoroughly clean the outside surfaces of the fuel filter. Open the drain (1) in order to drain the fuel from the filter.
Use a suitable strap wrench to loosen the filter case (2). Remove the filter case (2) from the filter head (5).
Push down against the spring pressure that is applied to the filter element (4). Rotate the filter element (4) counterclockwise in order to release the filter element from the filter case (2).
Discard the filter element (4) and the O-ring (3). Installation Procedure
The element filter has a fuel filter element in a filter case that combined with the fuel priming pump.Installation Procedure for the Element Filter
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01010637
Typical example
Illustration 4 g01010595
Typical example
Thoroughly clean the inside of the filter case (2) and thoroughly clean the lower face of the filter head (5).
Inspect the thread of a new filter element (4) in order to ensure that the thread is not damaged. Inspect the thread of the adapter in the filter head (5) in order to ensure that the thread is not damaged.
Inspect the condition of the spring and ensure that the spring is correctly located within the filter case (2).
Install the new filter element (4) into the filter case (2). Push the filter element against the spring pressure and rotate the filter element in a clockwise direction in order to secure the filter element within the filter case (2).
Lightly lubricate a new O-ring (3) with clean fuel oil. Install the new O-ring (3) into the recess within the filter case (2).
Close the drain (1).
Remove the air from the fuel system. Refer to the Operations and Maintenance Manual, "Fuel System - Prime". Remove the suitable container and dispose of the fuel that has drained as waste.
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
311, 311B, 311C, 312, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, ...
215B, 225, 229D, 231D, 320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 5130, 5130B, 5230, 539, 844, 854G, 990, 990 II, 992G, E300B, M325B
153, 320D FM, 322 FM L, 325 L, 330, 539, 613G, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 910, 918F, 924F, 931, 931B, 933, 933C, 935C I...
611, 615, 615C, 621, 621B, 621E, 621F, 621G, 621R, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 814B, 815, 815B, 966C, 966D, 980B, D25C, D25D, D30C, D350C, D35C, D35HP, D400, D40D, M325B, RM-250C, ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B, 325B L, 325C, 325C FM, 325D, 325D...
320 L, 320B, 320B FM LL, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
1090, 1190, 1190T, 1390, 2290, 2390, 322B L, 322C, 322C FM, 324D FM, 325 L, 325B L, 325C, 325C FM, 325C L, 511, 521, OEMS, TK711, TK721, TK741
322, 322 FM L, 322B, 322B L, 322B LN, OEMS
330, 330 FM L, 330B L, 330C FM, 330C L, 330C MH, 350, OEMS, TK1051
330, 330 FM L, 330 L, 330B, 330B L, OEMS
330, 330 FM L, 330 L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
320 L, 320B, 320B FM LL, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, M325B, W330B
1076948
SPRING
320B, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
320B, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
320 L, 320B, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, M325B, W330B
320B, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
0854743
SPRING
320B, 320B L, 320B U, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330, 330B L, E200B, E240C, E300B, EL240B
320B, 320B L, 320B U, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330, 330B L, E200B, E240C, E300B, EL240B
0995837
SPRING
320 L, 320B, 320B U, 320N, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, E300B, M325B
320 L, 320B, 320B U, 320N, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, E300B, M325B
320B, 321B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 345B II, 345B II MH, W330B, W345B II
1090, 320 L, 320B, 320B U, 320N, 321B, 322, 322 FM L, 322B, 322B L, 322B LN, 325, 325B, 325B L, 330, 330 L, 330B, 330B L, 345B, 345B II, 345B II MH, 345B L, TK1051, TK711, TK721, TK722, TK732, W330B, ...
0874762
SPRING
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
0874763
SPRING
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330, 330B L, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, M325B, W330B, W345B II, W345C MH
1335392
SPRING
320B, 322B L, 322B LN, 325B L, 330B L, W330B
320B, 322B L, 322B LN, 325B L, 330B L, W330B