6E5168 SPRING Caterpillar parts
320 L, 320B, 320B FM LL, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, M325B, W330B
Rating:
Alternative (cross code) number:
CA6E5168
6E-5168
6E5168
CA6E5168
6E-5168
6E5168
Weight: 0.01 pounds 0 kg.
Information:
ACTUAL RATE
1.04
N/MM
FREE LENGTH
25.4
mm
OD
3.95
mm
SOLID LENGTH
9.87
mm
WIRE DIAMETER
.52
mm
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 6E5168:
Number on catalog scheme:
16
For full view, you need register
Information:
Introduction
The priming pump is mounted above the starting motor. The priming pump is combined with the fuel filter.Removal Procedure
Start By:
Remove the assembly of the filter case and the fuel filter element. Refer to this Disassembly and Assembly Manual, "Fuel Filter Base - Remove and Install". Note: There is an option for the three cylinder engine. The fuel priming pump and the fuel filter can be installed onto the application rather than onto the engine. If this is the case, refer to the appropriate installation manual that is supplied by the OEM for further information.Note: Put identification marks on all fuel hose assemblies and on all tube assemblies for installation purposes. After being disconnected, plug all fuel hose assemblies and plug all tube assemblies. This helps prevent fluid loss, and this helps to keep contaminants from entering the system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00952432
Typical example
Disconnect the tube assembly (5). Disconnect the tube assembly (6). Install dust covers onto the connectors for the fuel priming pump.
Disconnect the fuel return line from the connector (3). Install a dust cover to the connector (3).
Disconnect the harness assembly from the connector (2).
Support the fuel priming pump. Remove the three setscrews (1) and discard the rubber washers. Remove the fuel priming pump (4). Installation Procedure
The priming pump is mounted above the starting motor. The priming pump is combined with the fuel filter.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00952432
Typical example
Clean the external surfaces of the fuel priming pump (4). Position the fuel priming pump (4) and install the three setscrews (1) and new rubber washers.
Remove the dust covers from the fuel priming pump (4). Remove the plugs from the tube assemblies. Connect the tube assembly (5). Connect the tube assembly (6).
Connect the fuel return line to the connector (3).
Connect the harness assembly to the connector (2).
Remove the air from the fuel system. Refer to the Operations and Maintenance Manual, "Fuel System - Prime".
The priming pump is mounted above the starting motor. The priming pump is combined with the fuel filter.Removal Procedure
Start By:
Remove the assembly of the filter case and the fuel filter element. Refer to this Disassembly and Assembly Manual, "Fuel Filter Base - Remove and Install". Note: There is an option for the three cylinder engine. The fuel priming pump and the fuel filter can be installed onto the application rather than onto the engine. If this is the case, refer to the appropriate installation manual that is supplied by the OEM for further information.Note: Put identification marks on all fuel hose assemblies and on all tube assemblies for installation purposes. After being disconnected, plug all fuel hose assemblies and plug all tube assemblies. This helps prevent fluid loss, and this helps to keep contaminants from entering the system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00952432
Typical example
Disconnect the tube assembly (5). Disconnect the tube assembly (6). Install dust covers onto the connectors for the fuel priming pump.
Disconnect the fuel return line from the connector (3). Install a dust cover to the connector (3).
Disconnect the harness assembly from the connector (2).
Support the fuel priming pump. Remove the three setscrews (1) and discard the rubber washers. Remove the fuel priming pump (4). Installation Procedure
The priming pump is mounted above the starting motor. The priming pump is combined with the fuel filter.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00952432
Typical example
Clean the external surfaces of the fuel priming pump (4). Position the fuel priming pump (4) and install the three setscrews (1) and new rubber washers.
Remove the dust covers from the fuel priming pump (4). Remove the plugs from the tube assemblies. Connect the tube assembly (5). Connect the tube assembly (6).
Connect the fuel return line to the connector (3).
Connect the harness assembly to the connector (2).
Remove the air from the fuel system. Refer to the Operations and Maintenance Manual, "Fuel System - Prime".
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
311, 311B, 311C, 312, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, ...
215B, 225, 229D, 231D, 320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 5130, 5130B, 5230, 539, 844, 854G, 990, 990 II, 992G, E300B, M325B
153, 320D FM, 322 FM L, 325 L, 330, 539, 613G, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 910, 918F, 924F, 931, 931B, 933, 933C, 935C I...
611, 615, 615C, 621, 621B, 621E, 621F, 621G, 621R, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 814B, 815, 815B, 966C, 966D, 980B, D25C, D25D, D30C, D350C, D35C, D35HP, D400, D40D, M325B, RM-250C, ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B, 325B L, 325C, 325C FM, 325D, 325D...
320 L, 320B, 320B FM LL, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
1090, 1190, 1190T, 1390, 2290, 2390, 322B L, 322C, 322C FM, 324D FM, 325 L, 325B L, 325C, 325C FM, 325C L, 511, 521, OEMS, TK711, TK721, TK741
322, 322 FM L, 322B, 322B L, 322B LN, OEMS
330, 330 FM L, 330B L, 330C FM, 330C L, 330C MH, 350, OEMS, TK1051
330, 330 FM L, 330 L, 330B, 330B L, OEMS
330, 330 FM L, 330 L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
1076948
SPRING
320B, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
320B, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
320 L, 320B, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, M325B, W330B
320B, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
0854743
SPRING
320B, 320B L, 320B U, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330, 330B L, E200B, E240C, E300B, EL240B
320B, 320B L, 320B U, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330, 330B L, E200B, E240C, E300B, EL240B
0995837
SPRING
320 L, 320B, 320B U, 320N, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, E300B, M325B
320 L, 320B, 320B U, 320N, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, E300B, M325B
1081099
SPRING
322 FM L, 322B L, 325B L, 330, 330 FM L, 330B L
322 FM L, 322B L, 325B L, 330, 330 FM L, 330B L
1090, 320 L, 320B, 320B U, 320N, 321B, 322, 322 FM L, 322B, 322B L, 322B LN, 325, 325B, 325B L, 330, 330 L, 330B, 330B L, 345B, 345B II, 345B II MH, 345B L, TK1051, TK711, TK721, TK722, TK732, W330B, ...
0874762
SPRING
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
0874763
SPRING
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330, 330B L, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, M325B, W330B, W345B II, W345C MH
1335392
SPRING
320B, 322B L, 322B LN, 325B L, 330B L, W330B
320B, 322B L, 322B LN, 325B L, 330B L, W330B
320 L, 320B, 320B FM LL, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, M325B, W330B