6T7538 SPRING Caterpillar parts
D4H, D5H
Rating:
Alternative (cross code) number:
CA6T7538
6T-7538
6T7538
CA6T7538
6T-7538
6T7538
Weight: 0.05 pounds 0 kg.
Information:
ACTUAL RATE
3.84
N/MM
FREE LENGTH
88.65
mm
OD
19.3
mm
SOLID LENGTH
38.83
mm
WIRE DIAMETER
2.3
mm
TRACK-TYPE TRACTOR,
Number on catalog scheme:
16
For full view, you need register
Information:
Clean the cooling system before the recommended maintenance interval if the following conditions exist:
The engine overheats frequently.
Foaming is observed.
Oil has entered the cooling system and the coolant is contaminated.
Fuel has entered the cooling system and the coolant is contaminated.Drain the Cooling System
Stop the engine and allow the engine to cool. Ensure that the engine will not start when the cooling system is drained.
Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Illustration 1 g01162705
Locations of the drain plugs (1) Oil cooler (2) Jacket water pump (3) SCAC water pump
Open the cooling system drain valves (if equipped). If the cooling system is not equipped with drain valves, remove drain plugs (1), (2), and (3). Allow the coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Dealer Service Tools Group:Outside Illinois: 1-800-542-TOOLInside Illinois: 1-800-541-TOOLCanada: 1-800-523-TOOLClean the Cooling System
After the cooling system has been drained, flush the cooling system with clean water in order to remove any debris.
Close the cooling system drain valves (if equipped). Clean the drain plugs and install the drain plugs.
Use of commercially available cooling system cleaners may cause damage to cooling system components. Use only cooling system cleaners that are approved for Caterpillar engines.
Fill the cooling system with a mixture of clean water and Caterpillar Fast Acting Cooling System Cleaner. Add .5 L (1 pint) of cleaner per 15 L (4 US gal) of the cooling system capacity. Install the cooling system filler cap.
Start the engine. Operate the engine for a minimum of 30 minutes with a coolant temperature of at least 82 °C (180 °F).
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap. Open the cooling system drain valves (if equipped) or remove the drain plugs. See Illustration 1.
Improper or incomplete rinsing of the cooling system can result in damage to copper and other metal components.To avoid damage to the cooling system
The engine overheats frequently.
Foaming is observed.
Oil has entered the cooling system and the coolant is contaminated.
Fuel has entered the cooling system and the coolant is contaminated.Drain the Cooling System
Stop the engine and allow the engine to cool. Ensure that the engine will not start when the cooling system is drained.
Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Illustration 1 g01162705
Locations of the drain plugs (1) Oil cooler (2) Jacket water pump (3) SCAC water pump
Open the cooling system drain valves (if equipped). If the cooling system is not equipped with drain valves, remove drain plugs (1), (2), and (3). Allow the coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Dealer Service Tools Group:Outside Illinois: 1-800-542-TOOLInside Illinois: 1-800-541-TOOLCanada: 1-800-523-TOOLClean the Cooling System
After the cooling system has been drained, flush the cooling system with clean water in order to remove any debris.
Close the cooling system drain valves (if equipped). Clean the drain plugs and install the drain plugs.
Use of commercially available cooling system cleaners may cause damage to cooling system components. Use only cooling system cleaners that are approved for Caterpillar engines.
Fill the cooling system with a mixture of clean water and Caterpillar Fast Acting Cooling System Cleaner. Add .5 L (1 pint) of cleaner per 15 L (4 US gal) of the cooling system capacity. Install the cooling system filler cap.
Start the engine. Operate the engine for a minimum of 30 minutes with a coolant temperature of at least 82 °C (180 °F).
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap. Open the cooling system drain valves (if equipped) or remove the drain plugs. See Illustration 1.
Improper or incomplete rinsing of the cooling system can result in damage to copper and other metal components.To avoid damage to the cooling system
Caterpillar parts catalog:
Parts spring Caterpillar catalog:
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 215, 225, 229, 235, 235B, 245, 3204, 330, 330 FM L, 330 L, 33...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 235B, 245, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, ...
1090, 1140, 1150, 1160, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14G, 14H, 14H NA, 14M, 16,...
416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 436C, 438C, 438D, 446B, 446D, 517, 527, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D6M, D6N
416, 426, 436, 517, 527, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E, AP-1000B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C, D5H, D5H XL, D5HTSK II, D6M
3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 517, 527, 561B, 561C, 561D, 561M, 571G, 572G, 572R, 578, 583K, 583R, 587R, 589, 941, 950, 955H, 955L, 977H, 977K, 977L, 983, 983B, D10, D10N, D11N, D320A,...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303, 304, 305, 311C, 311D LRR, 312C L, 312D, 312D L, 312D2, 313D, 314C, 314D CR, 314D LCR, 315B FM L, 315C, 320B FM LL, 320C, 320C FM, 320...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H, 16H NA, 515, 525, 52...
12H, 12H NA, 140H, 140H NA, 30/30, 3208, 517, 518, 527, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6R III, D6T, DEUCE
517, 561H, 561M, 7A, 910, 910E, 931B, 931C II, 933, 939, D3B, D3C II, D3C III, D4C III, D4H, D4H XL, D4HTSK II, D4HTSK III, D5C III, D5M, D7G, D7G2, D7H, D8H, D9G, D9L, IT12, IT12B
517, 527, D10N, D11N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5HTSK II, D5M, D6M, D9R
1612627
SPRING
D4H, D4H XL, D4HTSK II
D4H, D4H XL, D4HTSK II
7B6405
SPRING
561B, 561C, 977D, D4E, D5, D5B, D5E
561B, 561C, 977D, D4E, D5, D5B, D5E
153, 163, 172, 173B, 183B, 191, 613, 613B, 615, 630B, 631D, 631E, 631G, 633, 633C, 637E, 637G, 650B, 651, 651E, 657E, 657G, 769, 814, 815, 824, 824B, 824S, 834, 8D, 930, 950, 955H, 955K, 955L, 966C, 9...
153, 163, 173B, 183B, 191, 613, 613B, 615, 631C, 637D, 641, 641B, 651, 657, 824, 824B, 834, 950, 955H, 966C, 977H, 980B, 988, D4E, D4E SR, D5B, D5E, D6D, D7F
D3C III, D3G, D4C III, D4G, D5C III, D5G, D6G, D6G2 LGP, D6G2 XL, D7G, D7G2
D4H, D5H
173B, 183B, 844, 844H, 844K, 854G, 854K, D10, D10N, D10R, D10T, D11N, D11R, D11T, D4H, D5H, D7G, D8K, D8L, D9H, D9L, D9N
120G, 12G, 14G, 621, 637D, 641B, D4H, D5H
621, 641, 650B, 651, 657, 657B, 666, 992, D4H, D5H
7T7428
SPRING
D4H, D5H
D4H, D5H