SPRING AS-GAS 8C6413 - Caterpillar

Illustration 1 g06251609
Table 1
Item Qty Part Specification Description
- All bores must be free of paint. Use the 5P-0960 Grease Cartridge in order to coat all bores for the pins, the stick, the upper frame, and the cylinder pin bores.
1 1 113-2963 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
2 1 131-8552 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
3 1 248-1674 Pin As Diameter is 99.85 0.04 mm (3.931 0.002 inch).
4 As required, use the following shims to adjust the maximum lateral clearance of 0.8 mm (0.03 inch):
2 133-2427 Shim Thickness is 0.5 mm (0.02 inch).
1 093-0090 Shim Thickness is 1.0 mm (0.04 inch).
1 093-0122 Shim Thickness is 2.0 mm (0.08 inch).
5 2 166-1496 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
6 2 228-5617 Bushing Install the bushing in the bore so that the part number of the bushing is facing outward.
Inside diameter before assembly is 100.216 0.040 mm (3.9455 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
7 As required, use the following shims to adjust the maximum lateral clearance of 0.8 mm (0.03 inch):
2 113-2127 Shim Thickness is 0.5 mm (0.02 inch).
1 093-0083 Shim Thickness is 1.0 mm (0.04 inch).
1 093-0116 Shim Thickness is 2.0 mm (0.08 inch).
8 As required, use the following shims to adjust the maximum lateral clearance of 0.8 mm (0.03 inch):
2 133-2425 Shim Thickness is 0.5 mm (0.02 inch).
1 093-0083 Shim Thickness is 1.0 mm (0.04 inch).
1 093-0115 Shim Thickness is 2.0 mm (0.08 inch).