SPRING 8P2893 - Caterpillar

Illustration 1 g02594821
Front view
Illustration 2 g02826376
Table 1
Specification for 334-5306 Accessory Drive Gp
Item Qty Part Specification Description
1 1 7N-5874 Auxiliary Drive Shaft Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
Width of groove for thrust washer is 8.75 0.10 mm (0.344 0.004 inch).
2 1 235-3546 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
3 1 7N-5279 Adapter As During assembly, align the hole in the bushing with the adapter assembly.
After assembly, bore in the 127-5400 Bushing is 75.000 0.055 mm (2.9527 0.0022 inch).
4 1 6V-3348 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
5 1 5P-0840 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
6 1 259-4598 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
7 1 7C-4165 Adapter As During assembly, align the hole in the bushing with the adapter assembly.
After assembly, bore in the 127-5400 Bushing is 75.000 0.055 mm (2.9527 0.0022 inch).
8 2 7N-7539 Thrust Washer Thickness of one new thrust washer is 8.50 0.05 mm (0.335 0.002 inch).