SPRING 8P8407 - Caterpillar

8P8407 SPRING Caterpillar parts D10

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8P8407
8P-8407
8P8407

Weight: 7 pounds 3 kg.

Information:

HEIGHT 15.55 mm

ID/THREAD SIZE 0330.200

LOAD WHEN FLAT 30248 N

OD 444.5 mm

THICKNESS 6.48 mm

Buy SPRING 8P8407 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 8P8407:

TRACK-TYPE TRACTOR D10 Caterpillar

Number on catalog scheme: 2

For full view, you need register

Information:

Disassembly Procedure
Start By:
Remove the makeup valve. Refer to Disassembly and Assembly, "Makeup Valve (Hydraulic Fan Motor) - Remove". Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01437890
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (7) and O-ring seal (6).
Remove plug (1), O-ring seal (2), spring (3), and valve (4) from body (5).